Bearing unit - F 11210 FAG

UCP 205 CRAFT
Bearing unit for supporting a shaft in a mounting assembly. Check the designation, documentation or original part for dimensions and compatibility.

TECH_NOTE_UCP205CRAFTCast-iron CRAFT UCP 205 pillow block unit for a 25 mm shaft; H 36.5 mm, L 140 mm, J 105 mm, M10 bolt.

FYTB 30 TF SKF
Bearing unit for supporting a shaft in an assembly. Before ordering, verify the designation, dimensions and compatibility with the original part.

TECH_NOTE_FYTB30Two-hole oval flanged cast-iron SKF FYTB 30 TF unit for a 30 mm shaft; H 141.5 mm, J 116.5 mm, L 83 mm, holes N 11.5 mm.

PFT 47 SKF
Oval flanged pressed-steel housing for an insert bearing; H 91 mm, L 67 mm, J 71.4 mm, mounting hole N 8.7 mm. Insert bearing not included.

d 40 × H 49,2 × L 184 × J 137 × A 54 mm | N 17 × N1 21 mm
P 208 LBC

P 208 LBC is a cast-iron plummer block unit with a long base for a 40 mm shaft, UC 208 insert bearing, set-screw locking and M14 mounting bolts.

UL208 NTN
Bearing unit for supporting a shaft in an assembly. Before ordering, verify the designation, dimensions and compatibility with the original part. Bearing dimensions: 40 × 80 × 23 mm (inner diameter × outer diameter × width).

SY 40 TF SKF
Bearing unit for supporting a shaft in an assembly. Before ordering, verify the designation, dimensions and compatibility with the original part.

SKF SY 40 TF pillow-block unit for a 40 mm shaft; standard H=99 mm, J=88.9 mm, L=116 mm, mounting thread M12. Verify the exact variant.

PFT 52 SKF
Bearing unit for supporting a shaft in an assembly. Before ordering, verify the designation, dimensions and compatibility with the original part.

TECH_NOTE_PFT52Oval flanged pressed-steel SKF PFT 52 housing for an insert bearing; H 95 mm, L 71 mm, J 76.2 mm, hole N 8.7 mm. Insert bearing not included.

d 40 × a 130 × e 102 × i 21 × g 15 × l 36 × s 16 × z 51,2 × B 49,2 × n 19 mm
F 208 DPI is a cast-iron flange housing for a four-bolt UCF 208 unit with UC 208 insert for a 40 mm shaft and M14 mounting bolts.

UCFC 208 BBC – d = 40 mm; four-bolt round flange; L = 145 mm; J = 120 mm.