Bearing unit - F509-A-L FAG

PFT 20 TF SKF
Two-hole oval flanged bearing unit with pressed-steel housing for a 20 mm shaft; H 91 mm, L 91 mm, J 71.4 mm, mounting hole N 8.7 mm.

PFT20_TECH_NOTEH 91 mm, L 91 mm, J 71.4 mm, hole N 8.7 mm, bearing bore d 20 mm.

d 30 × H 42,9 × L 165 × J 121 × A 48 mm | N 17 × N1 20 mm
UCP 206 D1 DPI is a cast-iron UCP200 pillow block unit for a 30 mm shaft with a UC206D1 insert bearing, grease fitting and two set screws.

d 25 × L 95 × A 27 × J 70 mm | N 12 × A1 13 × A2 16 mm
F 205 KBS

F 205 KBS is a cast-iron four-bolt square flange unit for a 25 mm shaft, with a UC 205 insert bearing, set-screw locking and M10 mounting bolts.

UL208 NTN
Bearing unit for supporting a shaft in an assembly. Before ordering, verify the designation, dimensions and compatibility with the original part. Bearing dimensions: 40 × 80 × 23 mm (inner diameter × outer diameter × width).

UCFC 208 BBC – d = 40 mm; four-bolt round flange; L = 145 mm; J = 120 mm.

d 12 × H 30,2 × L 127 × A 38 × J 95 mm | N 13 × N1 18 mm
UCP 201 MTM is a cast-iron pillow block bearing unit for a 12 mm shaft with a UC 201 self-aligning insert bearing, grease nipple and two set screws.