Bearing unit - F513-B-L FAG
Unsure if the part fits? Send us the designation, dimensions or a photo.
Send an inquiryRelated products
This KUVAL product carries the complete designation S 507. When replacing a part, compare its complete marking and brand with the assembly documentation.
QMMC30J140ST by Timken: spherical roller bearing housed unit with a solid-block housing.
Dimensions according to drawing: Shaft diameter: 140 mm; A = 19.8 mm; B = 38.1 mm; D = 5.6 mm; S = 192.0 mm; C = 205.0 mm; G = 154.4 mm
P 210 SNR by SNR: bearing housing.
Dimensions according to drawing: L = 206 mm; J = 159 mm; H = 57.2 mm; A = 60 mm; H2 = 114 mm; H1 = 22 mm
UCP 206 MTM by MTM: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 30 mm; h = 42.9 mm; a = 160 mm; e = 121 mm; b = 44 mm; S1 = 17 mm; S2 = 20 mm
UCF 207 ASAHI is a complete flanged bearing unit for a 35 mm shaft. It combines bearing UC207 with cast-iron housing F207 and locks to the shaft using set-screws. The square flange has four fixing holes.
Split plummer block housing SN 510 CX. Shaft diameter: 45 mm; D = 90 mm.
This KUVAL bearing housing carries the complete designation S 512. When replacing a part, compare its complete marking and brand with the assembly documentation.
QMCW30J140ST by Timken: spherical roller bearing housed unit with a solid-block housing.
Dimensions according to drawing: Shaft diameter: 140 mm; J = 24 mm; B.C. = 368.3 mm; H = 26.2 mm; D = 304.8 mm; N = 121.4 mm; E = 184.2 mm
UCF 208 ASAHI is a four-bolt square flanged bearing unit for a 40 mm shaft. Two set screws secure the bearing to the shaft.
UCF 205 ASAHI is a complete flanged bearing unit for a 25 mm shaft. It combines bearing UC205 with cast-iron housing F205 and locks to the shaft using set-screws. The square flange has four fixing holes.
UCFC 207 neu: flange bearing unit (round flange).
Dimensions according to drawing: Shaft diameter: 35 mm; L = 135 mm; J = 110 mm; A = 34 mm; B = 42.9 mm; N = 14 mm; J1 = 77.8 mm
F 208 NTN is a one-piece cast iron bearing housing with a square flange and four fixing holes. It is a housing for assembling a bearing arrangement; F 208 alone does not designate a complete UCF208 unit.
UCFC 210 ASAHI is a four-bolt round flanged bearing unit with a locating spigot for a 50 mm shaft. Two set screws secure it to the shaft.
FYC 508 SKF by SKF: flanged bearing housing (round flange).
Dimensions according to drawing: L = 145 mm; J = 120 mm; N = 14 mm; Da = 100 mm; A1 = 36 mm; A3 = 10 mm
This KUVAL product carries the complete designation S 505. When replacing a part, compare its complete marking and brand with the assembly documentation.
Product detailed description
F513-B-L FAG by FAG: bearing housing.
Technical specifications
- Designation: F513-B-L FAG
- Manufacturer: FAG
- h: 75 mm
- h1: 198 mm
- c: 16 mm
- a: 219 mm
- m: 190 mm
- Series: F
- Housing material: cast iron
Before installation, check the dimensions, bearing arrangement and operating conditions against the manufacturer’s documentation. Follow the manufacturer’s installation and maintenance instructions.
Additional parameters
| Category: | Bearing housings |
|---|---|
| Weight: | 6.3 kg |
| EAN: | 4012801480499 |
UCP 204 IB is a complete bearing and housing unit with a 20 mm bore, standard Y-bearing sealing identified as 2F, and standard lubrication.
UCF 208 MSC by MSC: flange bearing unit (square flange). Shaft diameter: 40 mm.
DV 211 A KOVO CHEB: Housing for a suspended bearing arrangement in a machine structure. Replacement depends on the complete DV 211 A designation, mounting arrangement and bearing seat.
UCP 201 MTM by MTM: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 12 mm; h = 30.2 mm; a = 127 mm; e = 95 mm; b = 38 mm; S1 = 13 mm; S2 = 19 mm
UCP 207 MTM by MTM: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 35 mm; h = 47.6 mm; a = 167 mm; e = 127 mm; b = 48 mm; S1 = 17 mm; S2 = 20 mm
QMPH30J515SM by Timken: spherical roller bearing housed unit with a solid-block housing.
Dimensions according to drawing: Shaft diameter: 5 15⁄16 in.; L = 201.7 mm; J = 24 mm; H = 85.9 mm; A = 179.4 mm; B = 339.9 mm; K = 75.9 mm
UCP 210 MTM by MTM: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 50 mm; h = 57.2 mm; a = 206 mm; e = 159 mm; b = 60 mm; S1 = 20 mm; S2 = 23 mm
This KUVAL product carries the complete designation S 613. When replacing a part, compare its complete marking and brand with the assembly documentation.
This STEYR product carries the complete designation S 511. When replacing a part, compare its complete marking and brand with the assembly documentation.
UCP 213 JIB is a complete pillow block bearing unit for a 65 mm shaft. It combines bearing UC213 with cast-iron housing P213; set-screws lock the inner ring to the shaft.
This KUVAL product carries the complete designation S 511. When replacing a part, compare its complete marking and brand with the assembly documentation.
This NTN product carries the complete designation UCFL 204 J. When replacing a part, compare its complete marking and brand with the assembly documentation.
UCFC 216 FYH is a four-bolt round flanged bearing unit with a locating spigot for an 80 mm shaft. Two set screws secure it to the shaft.
This KUVAL product carries the complete designation S 508. When replacing a part, compare its complete marking and brand with the assembly documentation.
UCFL 205 KBS by KBS: flange bearing unit (oval flange).
Dimensions according to drawing: Shaft diameter: 25 mm; L = 68 mm; J = 99 mm; H = 130 mm; A = 27 mm
P 204 J NTN is a standalone pillow-block housing for a matching insert bearing.
Product rating
Be the first who will post an article to this item!
We can source almost any FAG product, even if you cannot find it in our online shop.
Send us the product designation and quantity required. We will check the price, availability and delivery options.
Enquire about FAG productsFAG – Product range and selection
The FAG range includes, for example: ball bearings, cylindrical and spherical roller bearings, tapered roller bearings.
Examples from our catalogue
- HCB 7006 CTP4SDUL FAG
- B7007 E 2RSD T P4S UL FAG
- UKP218-J7 FAG
What to include in your enquiry
- The full product designation, including all suffixes and specifications.
- The quantity required and, if relevant, when you need the part.
- Nameplate details, dimensions or a description of the application if the designation is unknown.
You can email a photo or drawing to info@Loziska-Policka.cz.
Your enquiry is non-binding. We will confirm the price, availability and delivery time for the specific product and discuss any alternative with you first.
Choose FAG bearings by the complete designation, including suffixes. The required design and operating conditions matter alongside the bearing dimensions.
Compare the complete specification
Check bore, outside diameter, width, internal clearance and the specified shielding or sealing. For a replacement, include the machine application and a photograph of the original marking.
Is a dimensionally identical bearing enough?
Verify the complete specification before substituting a bearing. Different suffixes can identify different designs; a similar reference alone does not confirm suitability.
Request a FAG quotation · Select bearings by designation or size
Availability and any replacement will be confirmed for the specific item.
| Manufacturing company : | Schaeffler Technologies AG & Co. KG |
|---|---|
| Address : | Industriestraße 1–3, 91074 Herzogenaurach, Germany |
| E-mail : | info@schaeffler.com |