Bearing unit - FNL 506 A (722506D) SKF
Related products
UKP216 FBJ
Bearing unit for supporting a shaft in an assembly. Before ordering, verify the designation, dimensions and compatibility with the original part.
d 30 × H 42,9 × L 160 × J 121 × A 44 mm | S1 17 × S2 20 mm
UCP 206 MTM is a cast-iron pillow block unit for a 30 mm shaft with a self-aligning insert bearing and two set screws.
FYTB 30 TF SKF
Bearing unit for supporting a shaft in an assembly. Before ordering, verify the designation, dimensions and compatibility with the original part.
TECH_NOTE_FYTB30Two-hole oval flanged cast-iron SKF FYTB 30 TF unit for a 30 mm shaft; H 141.5 mm, J 116.5 mm, L 83 mm, holes N 11.5 mm.
d 25 × L 95 × A 27 × J 70 mm | N 12 × A1 13 × A2 16 mm
F 205 KBS
F 205 KBS is a cast-iron four-bolt square flange unit for a 25 mm shaft, with a UC 205 insert bearing, set-screw locking and M10 mounting bolts.
d 35 × H 47,6 × L 167 × J 127 × A 48 mm | N 17 × N1 21 mm
P 207 CRAFT is a cast-iron pillow-block unit with a long base for a 35 mm shaft, UC 207 insert, set-screw locking and M14 mounting bolts.
Product detailed description
FNL 506 A SKF (722506D)
FNL 506 A SKF is a separate undivided three-bolt flanged bearing housing made of cast iron, with an end cover for a shaft end. It is not a complete bearing unit: the bearing, adapter sleeve and any locating rings are selected and ordered separately. The housing is supplied with standard seals.
For FNL 506, the SKF catalogue lists a nominal 25 mm shaft diameter. Dimensions are AA = 60.5 mm, AB = 60 mm, A1 = 12 mm, Ba = 16 mm, Bb = 15 mm, D1 = 86 mm, H = 117 mm, H1 = 44 mm, J = 116 mm, L = 130 mm and G = 10 mm; housing mass is approximately 1.6 kg. The housing has three mounting holes and an end cover; version B is for a through shaft.
The standard TFL 506 seal is a double-lip seal. Before ordering, check whether you need the FNL 506 A housing with cover alone or a complete assembly with a suitable bearing and adapter sleeve. Compare the 25 mm shaft, J = 116 mm spacing and 130 × 117 mm dimensions with the original part.
62 × 108 × 32.5 mm
SKF FY 506 M separate four-bolt square flanged cast iron housing for an insert bearing; the insert bearing is not included.
UCP 205 FSY
Bearing unit for supporting a shaft in a mounting assembly. Check the designation, documentation or original part for dimensions and compatibility.
UCF 207 MSC – d = 35 mm; L = 117 mm; J = 92 mm; A = 34 mm; B = 42,9 mm; S = 17,5 mm; M12.
UCFC 208 BBC – d = 40 mm; four-bolt round flange; L = 145 mm; J = 120 mm.
PFT 47 SKF
Oval flanged pressed-steel housing for an insert bearing; H 91 mm, L 67 mm, J 71.4 mm, mounting hole N 8.7 mm. Insert bearing not included.
80 × 102 × 38.5 mm
SKF FYTB 508 M separate two-bolt oval flanged cast iron housing for an insert bearing; the insert bearing is not included.
UCFC 207 neu
Bearing unit for supporting a shaft in a mounting assembly. Check the designation, documentation or original part for dimensions and compatibility.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any SKF product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
SKF – product identification and supply
The SKF designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.
| Manufacturing company : | AB SKF (publ) |
|---|---|
| Address : | Sven Wingquists Gata 2, SE-415 50 Göteborg, Sweden |
| E-mail : | skf.cz@skf.com |