Bearing unit - P 208 LBC
Related products
Product detailed description
P 208 LBC
P 208 LBC is a cast-iron plummer block housing with a long base. In the standard UCP 208 assembly it uses a self-aligning UC 208 insert bearing for a 40 mm shaft; the insert is secured on the shaft by set screws and the unit can be relubricated. Verified dimensions are d = 40 mm, shaft centre height H = 49.2 mm, overall length L = 184 mm, mounting-hole pitch J = 137 mm, base width A = 54 mm, mounting holes N = 17 mm × N1 = 21 mm, base height H1 = 18 mm, overall height H2 = 98 mm, base length L1 = 53 mm, insert width B = 49.2 mm and dimension S = 19 mm. The mounting bolts are M14, the grease nipple size is 1/4-28UNF and the complete unit weighs approximately 1.84 kg. Before ordering, compare the full P 208 designation, shaft diameter and base dimensions with the original part or technical documentation.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any LBC product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
LBC – product identification and supply
The LBC designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.