Bearing unit - RME100-XL INA

d 30 × H 42,9 × L 160 × J 121 × A 44 mm | S1 17 × S2 20 mm
UCP 206 MTM is a cast-iron pillow block unit for a 30 mm shaft with a self-aligning insert bearing and two set screws.

UCFC 208 BBC – d = 40 mm; four-bolt round flange; L = 145 mm; J = 120 mm.

UCFL 205 CRAFT
Bearing unit for supporting a shaft in an assembly. Before ordering, verify the designation, dimensions and compatibility with the original part. Unit dimensions: 25 mm (inner diameter), 130 mm (mounting-hole spacing) and 31 mm (width).

UCFL 205 CRAFT for a 25 mm shaft: spacing a=130 mm, e=99 mm, width B=34.1 mm, M14 mounting; UC205 insert and FL205 housing.

FYC 508 SKF
Bearing unit for supporting a shaft in an assembly. Before ordering, verify the designation, dimensions and compatibility with the original part.

TECH_NOTE_FYC508Round four-hole cast-iron flanged FYC 508 SKF housing/unit; Da 80 mm, J 120 mm, L 145 mm, mounting holes N 14 mm.

d 20 × a 86 × e 64 × i 15 × g 12 × l 25,5 × s 12 × z 33,3 × B 31 × n 12,7 mm
F 204 CRAFT is a cast-iron four-bolt flange housing for a UCF 204 bearing unit with a UC 204 insert and M10 mounting thread.

RUS 26126 GR3/-10-15 INA
Bearing unit for supporting a shaft in a mounting assembly. Check the designation, documentation or original part for dimensions and compatibility.

INA RUS 26126 GR3/-10-15 linear recirculating roller unit for linear guidance; parameters d=126.5 mm, D=39.975 mm, B=25.99 mm. Verify guide-rail compatibility.