Bearing unit - RMEY80-XL INA
Related products
62 × 108 × 32.5 mm
SKF FY 506 M separate four-bolt square flanged cast iron housing for an insert bearing; the insert bearing is not included.
UCF 206 CN – d = 30 mm; L = 108 mm; J = 83 mm; B = 38.1 mm.
d 30 · H 148 · L 80 · J 117 · A 31 · A2 40.2 mm
Complete two-bolt flanged SNR UCFL206 bearing unit with cast-iron FL206 housing, UC206G2 insert and M6×1 lubrication.
The HFH SNL 519-616 is a split plummer block housing designed to securely accommodate bearings, ensuring optimal performance and extended service life.
UCP 205 FSY
Bearing unit for supporting a shaft in a mounting assembly. Check the designation, documentation or original part for dimensions and compatibility.
Product detailed description
No product's description available
PFT 52 SKF
Bearing unit for supporting a shaft in an assembly. Before ordering, verify the designation, dimensions and compatibility with the original part.
TECH_NOTE_PFT52Oval flanged pressed-steel SKF PFT 52 housing for an insert bearing; H 95 mm, L 71 mm, J 76.2 mm, hole N 8.7 mm. Insert bearing not included.
UKP216 FBJ
Bearing unit for supporting a shaft in an assembly. Before ordering, verify the designation, dimensions and compatibility with the original part.
PFT 20 TF SKF
Two-hole oval flanged bearing unit with pressed-steel housing for a 20 mm shaft; H 91 mm, L 91 mm, J 71.4 mm, mounting hole N 8.7 mm.
PFT20_TECH_NOTEH 91 mm, L 91 mm, J 71.4 mm, hole N 8.7 mm, bearing bore d 20 mm.
UCF 207 MSC – d = 35 mm; L = 117 mm; J = 92 mm; A = 34 mm; B = 42,9 mm; S = 17,5 mm; M12.
PFT 47 SKF
Oval flanged pressed-steel housing for an insert bearing; H 91 mm, L 67 mm, J 71.4 mm, mounting hole N 8.7 mm. Insert bearing not included.
d 30 × H 42,9 × L 165 × J 121 × A 48 mm | N 17 × N1 20 mm
UCP 206 D1 DPI is a cast-iron UCP200 pillow block unit for a 30 mm shaft with a UC206D1 insert bearing, grease fitting and two set screws.
d 30 × H 42,9 × L 160 × J 121 × A 44 mm | S1 17 × S2 20 mm
UCP 206 MTM is a cast-iron pillow block unit for a 30 mm shaft with a self-aligning insert bearing and two set screws.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any INA product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
INA – product identification and supply
The INA designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.
| Manufacturing company : | Schaeffler Technologies AG & Co. KG |
|---|---|
| Address : | Industriestraße 1–3, 91074 Herzogenaurach, Germany |
| E-mail : | info@schaeffler.com |