Bearing unit - SES516-613-L FAG
Unsure if the part fits? Send us the designation, dimensions or a photo.
Send an inquiryRelated products
SNG 515 612 GLH is a split plummer block housing for an arrangement with a separately selected bearing.
This KUVAL product carries the complete designation S 610 A. When replacing a part, compare its complete marking and brand with the assembly documentation.
QVCW28V415SM by Timken: spherical roller bearing housed unit with a solid-block housing.
Dimensions according to drawing: Shaft diameter: 4 15⁄16 in.; H = 26.2 mm; D = 266.7 mm; C = 190.0 mm; Sv = 147.8 mm
UCF 205 ASAHI is a complete flanged bearing unit for a 25 mm shaft. It combines bearing UC205 with cast-iron housing F205 and locks to the shaft using set-screws. The square flange has four fixing holes.
Split plummer block housing SN 510 CX. Shaft diameter: 45 mm; D = 90 mm.
This KUVAL product carries the complete designation S 613. When replacing a part, compare its complete marking and brand with the assembly documentation.
UCF 207 ASAHI is a complete flanged bearing unit for a 35 mm shaft. It combines bearing UC207 with cast-iron housing F207 and locks to the shaft using set-screws. The square flange has four fixing holes.
QMPX30J600SM by Timken: spherical roller bearing housed unit with a solid-block housing.
Dimensions according to drawing: Shaft diameter: 6 in.; L = 196.9 mm; J = 24 mm; H = 85.6 mm; A = 179.4 mm; B = 339.9 mm; K = 75.9 mm
SY 509 M SKF by SKF: pillow block bearing housing.
Dimensions according to drawing: L = 187 mm; J = 143.5 mm; H = 107.5 mm; A = 48 mm; H2 = 21 mm; H1 = 54 mm
UCF 207 MSC by MSC: flange bearing unit (square flange).
Dimensions according to drawing: Shaft diameter: 35 mm; L = 117 mm
SY 508 M SKF by SKF: pillow block bearing housing.
Dimensions according to drawing: L = 175 mm; J = 135.5 mm; H = 99 mm; A = 48 mm; H2 = 19 mm; H1 = 49.2 mm
Separate oval two-bolt flange housing for assembling an arrangement with a bearing insert.
FYTB 30 TF SKF by SKF: flange bearing unit (oval flange).
Dimensions according to drawing: Shaft diameter: 30 mm; L = 83 mm; J = 116.5 mm; H = 141.5 mm; B = 38.1 mm; N = 11.5 mm; Da = 76.2 mm
Product detailed description
SES516-613-L FAG by FAG: bearing housing.
Technical specifications
- Designation: SES516-613-L FAG
- Manufacturer: FAG
- D: 140 mm
- h: 95 mm
- h1: 177 mm
- g: 120 mm
- b: 90 mm
- c: 32 mm
- a: 315 mm
- m: 260 mm
- v: 28 mm
- u: 22 mm
- Series: SES
- Housing material: cast iron
Before installation, check the dimensions, bearing arrangement and operating conditions against the manufacturer’s documentation. Follow the manufacturer’s installation and maintenance instructions.
Additional parameters
| Category: | Bearing housings |
|---|---|
| Weight: | 9.5 kg |
| EAN: | 4054372585210 |
This KUVAL product carries the complete designation S 510. When replacing a part, compare its complete marking and brand with the assembly documentation.
P 204 J NTN is a standalone pillow-block housing for a matching insert bearing.
This KUVAL product carries the complete designation S 609. When replacing a part, compare its complete marking and brand with the assembly documentation.
This NTN product carries the complete designation UCFL 204 J. When replacing a part, compare its complete marking and brand with the assembly documentation.
QMPF30J140ST by Timken: spherical roller bearing housed unit with a solid-block housing.
Dimensions according to drawing: Shaft diameter: 140 mm; L = 201.7 mm; J = 24 mm; H = 76.2 mm; A = 169.9 mm; B = 330.2 mm; K = 75.9 mm
This KUVAL product carries the complete designation S 511. When replacing a part, compare its complete marking and brand with the assembly documentation.
QMCW30J140ST by Timken: spherical roller bearing housed unit with a solid-block housing.
Dimensions according to drawing: Shaft diameter: 140 mm; J = 24 mm; B.C. = 368.3 mm; H = 26.2 mm; D = 304.8 mm; N = 121.4 mm; E = 184.2 mm
UCP 210 MTM by MTM: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 50 mm; h = 57.2 mm; a = 206 mm; e = 159 mm; b = 60 mm; S1 = 20 mm; S2 = 23 mm
Separate pedestal housing for a radial insert ball bearing. ASE 14 13 INA identifies the housing; the complete arrangement also depends on the selected bearing.
P 210 SNR by SNR: bearing housing.
Dimensions according to drawing: L = 206 mm; J = 159 mm; H = 57.2 mm; A = 60 mm; H2 = 114 mm; H1 = 22 mm
Complete pillow block unit for a 60 mm shaft, with set-screw locking and open-end cast dust covers. The C prefix forms part of this specific version.
UCP 213 JIB is a complete pillow block bearing unit for a 65 mm shaft. It combines bearing UC213 with cast-iron housing P213; set-screws lock the inner ring to the shaft.
UCP 207 MTM by MTM: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 35 mm; h = 47.6 mm; a = 167 mm; e = 127 mm; b = 48 mm; S1 = 17 mm; S2 = 20 mm
UCP 206 MTM by MTM: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 30 mm; h = 42.9 mm; a = 160 mm; e = 121 mm; b = 44 mm; S1 = 17 mm; S2 = 20 mm
Product rating
Be the first who will post an article to this item!
We can source almost any FAG product, even if you cannot find it in our online shop.
Send us the product designation and quantity required. We will check the price, availability and delivery options.
Enquire about FAG productsFAG – Product range and selection
The FAG range includes, for example: ball bearings, cylindrical and spherical roller bearings, tapered roller bearings.
Examples from our catalogue
- HCB 7006 CTP4SDUL FAG
- B7007 E 2RSD T P4S UL FAG
- UKP218-J7 FAG
What to include in your enquiry
- The full product designation, including all suffixes and specifications.
- The quantity required and, if relevant, when you need the part.
- Nameplate details, dimensions or a description of the application if the designation is unknown.
You can email a photo or drawing to info@Loziska-Policka.cz.
Your enquiry is non-binding. We will confirm the price, availability and delivery time for the specific product and discuss any alternative with you first.
Choose FAG bearings by the complete designation, including suffixes. The required design and operating conditions matter alongside the bearing dimensions.
Compare the complete specification
Check bore, outside diameter, width, internal clearance and the specified shielding or sealing. For a replacement, include the machine application and a photograph of the original marking.
Is a dimensionally identical bearing enough?
Verify the complete specification before substituting a bearing. Different suffixes can identify different designs; a similar reference alone does not confirm suitability.
Request a FAG quotation · Select bearings by designation or size
Availability and any replacement will be confirmed for the specific item.
| Manufacturing company : | Schaeffler Technologies AG & Co. KG |
|---|---|
| Address : | Industriestraße 1–3, 91074 Herzogenaurach, Germany |
| E-mail : | info@schaeffler.com |