Bearing unit - SNL 513-611 VU SKF
Related products
PFT 47 SKF
Oval flanged pressed-steel housing for an insert bearing; H 91 mm, L 67 mm, J 71.4 mm, mounting hole N 8.7 mm. Insert bearing not included.
UCF 210 MTM
Bearing unit for supporting a shaft in a mounting assembly. Check the designation, documentation or original part for dimensions and compatibility.
FYC 508 SKF
Bearing unit for supporting a shaft in an assembly. Before ordering, verify the designation, dimensions and compatibility with the original part.
TECH_NOTE_FYC508Round four-hole cast-iron flanged FYC 508 SKF housing/unit; Da 80 mm, J 120 mm, L 145 mm, mounting holes N 14 mm.
d 20 × a 86 × e 64 × i 15 × g 12 × l 25,5 × s 12 × z 33,3 × B 31 × n 12,7 mm
F 204 CRAFT is a cast-iron four-bolt flange housing for a UCF 204 bearing unit with a UC 204 insert and M10 mounting thread.
d 40 × H 49,2 × L 184 × J 137 × A 54 mm | N 17 × N1 21 mm
P 208 LBC
P 208 LBC is a cast-iron plummer block unit with a long base for a 40 mm shaft, UC 208 insert bearing, set-screw locking and M14 mounting bolts.
Product detailed description
No product's description available
UCFC 208 BBC – d = 40 mm; four-bolt round flange; L = 145 mm; J = 120 mm.
d 30 × H 42,9 × L 165 × J 121 × A 48 mm | N 17 × N1 20 mm
UCP 206 D1 DPI is a cast-iron UCP200 pillow block unit for a 30 mm shaft with a UC206D1 insert bearing, grease fitting and two set screws.
UCFL 205 CRAFT
Bearing unit for supporting a shaft in an assembly. Before ordering, verify the designation, dimensions and compatibility with the original part. Unit dimensions: 25 mm (inner diameter), 130 mm (mounting-hole spacing) and 31 mm (width).
UCFL 205 CRAFT for a 25 mm shaft: spacing a=130 mm, e=99 mm, width B=34.1 mm, M14 mounting; UC205 insert and FL205 housing.
RUS 26126 GR3/-10-15 INA
Bearing unit for supporting a shaft in a mounting assembly. Check the designation, documentation or original part for dimensions and compatibility.
INA RUS 26126 GR3/-10-15 linear recirculating roller unit for linear guidance; parameters d=126.5 mm, D=39.975 mm, B=25.99 mm. Verify guide-rail compatibility.
UCP 205 FSY
Bearing unit for supporting a shaft in a mounting assembly. Check the designation, documentation or original part for dimensions and compatibility.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any SKF product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
SKF – product identification and supply
The SKF designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.
| Manufacturing company : | AB SKF (publ) |
|---|---|
| Address : | Sven Wingquists Gata 2, SE-415 50 Göteborg, Sweden |
| E-mail : | skf.cz@skf.com |