Bearing unit - SNV215-F-L FAG
Unsure if the part fits? Send us the designation, dimensions or a photo.
Send an inquiryRelated products
SY 30 TF SKF by SKF: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 30 mm; L = 152 mm; J = 117.5 mm; H = 82.5 mm; A = 40 mm; H2 = 17 mm; H1 = 42.9 mm
Split plummer block housing SN 510 CX. Shaft diameter: 45 mm; D = 90 mm.
Split plummer block housing SN 513 DPI. Shaft diameter: 60 mm; L = 275 mm.
This NTN product carries the complete designation UCFL 204 J. When replacing a part, compare its complete marking and brand with the assembly documentation.
Complete pillow block unit for a 60 mm shaft, with set-screw locking and open-end cast dust covers. The C prefix forms part of this specific version.
SNH 507-606 SKF is a split plummer-block housing made of GG 20 grey cast iron. Width A is 82 mm and overall height H is 93 mm. The housing is supplied without a bearing or seals.
This KUVAL product carries the complete designation S 613. When replacing a part, compare its complete marking and brand with the assembly documentation.
QMPF30J140ST by Timken: spherical roller bearing housed unit with a solid-block housing.
Dimensions according to drawing: Shaft diameter: 140 mm; L = 201.7 mm; J = 24 mm; H = 76.2 mm; A = 169.9 mm; B = 330.2 mm; K = 75.9 mm
UCF 209 DPI is a square flanged bearing unit for a 45 mm shaft. Shaft locking: set screws.
SY 509 M SKF by SKF: pillow block bearing housing.
Dimensions according to drawing: L = 187 mm; J = 143.5 mm; H = 107.5 mm; A = 48 mm; H2 = 21 mm; H1 = 54 mm
FYTB 30 TF SKF by SKF: flange bearing unit (oval flange).
Dimensions according to drawing: Shaft diameter: 30 mm; L = 83 mm; J = 116.5 mm; H = 141.5 mm; B = 38.1 mm; N = 11.5 mm; Da = 76.2 mm
DV 312 A KOVO CHEB: Housing for a suspended bearing arrangement in a machine structure. Replacement depends on the complete DV 312 A designation, mounting arrangement and bearing seat.
UCP 208 DPI is a complete pillow block bearing unit for a 40 mm shaft. It combines bearing UC208 with cast-iron housing P208; set-screws lock the inner ring to the shaft.
UCP 204 IB is a complete bearing and housing unit with a 20 mm bore, standard Y-bearing sealing identified as 2F, and standard lubrication.
SY 40 TF SKF by SKF: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 40 mm; L = 175 mm; J = 135.5 mm; H = 99 mm; A = 48 mm; H2 = 19 mm; H1 = 49.2 mm
QMPH30J515SM by Timken: spherical roller bearing housed unit with a solid-block housing.
Dimensions according to drawing: Shaft diameter: 5 15⁄16 in.; L = 201.7 mm; J = 24 mm; H = 85.9 mm; A = 179.4 mm; B = 339.9 mm; K = 75.9 mm
Product detailed description
SNV215-F-L FAG by FAG: bearing housing.
Technical specifications
- Designation: SNV215-F-L FAG
- Manufacturer: FAG
- D: 215 mm
- a: 410 mm
- b: 120 mm
- c: 45 mm
- g: 180 mm
- h: 140 mm
- m: 350 mm
- Series: SNV
- Housing material: cast iron
Before installation, check the dimensions, bearing arrangement and operating conditions against the manufacturer’s documentation. Follow the manufacturer’s installation and maintenance instructions.
Additional parameters
| Category: | Bearing housings |
|---|---|
| Weight: | 24.5 kg |
RASEY 25 XL N INA by INA: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 25 mm; L = 130 mm; J = 103 mm; H = 36.5 mm; A = 36 mm; H1 = 14.5 mm; A1 = 21 mm
This ZKL product carries the complete designation UCSG 205. When replacing a part, compare its complete marking and brand with the assembly documentation.
UCF 208 ASAHI is a four-bolt square flanged bearing unit for a 40 mm shaft. Two set screws secure the bearing to the shaft.
DV 210 A KOVO CHEB: Housing for a suspended bearing arrangement in a machine structure. Replacement depends on the complete DV 210 A designation, mounting arrangement and bearing seat.
UCP 210 MTM by MTM: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 50 mm; h = 57.2 mm; a = 206 mm; e = 159 mm; b = 60 mm; S1 = 20 mm; S2 = 23 mm
UCP 207 CRAFT by CRAFT: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 35 mm; B = 42.9 mm; h = 47.6 mm; a = 167 mm; e = 127 mm; b = 48 mm; s1 = 17 mm
This KUVAL product carries the complete designation S 511. When replacing a part, compare its complete marking and brand with the assembly documentation.
This KUVAL product carries the complete designation S 616. When replacing a part, compare its complete marking and brand with the assembly documentation.
Split plummer block housing SNH 512 610 SKF. Da = 110 mm; L = 255 mm; J = 210 mm.
RASEY 20 JIS INA by INA: pillow block bearing unit. Shaft diameter: 20 mm; set-screw locking.
QMPX30J600SM by Timken: spherical roller bearing housed unit with a solid-block housing.
Dimensions according to drawing: Shaft diameter: 6 in.; L = 196.9 mm; J = 24 mm; H = 85.6 mm; A = 179.4 mm; B = 339.9 mm; K = 75.9 mm
UCF 208 MSC by MSC: flange bearing unit (square flange). Shaft diameter: 40 mm.
Separate oval two-bolt flange housing for assembling an arrangement with a bearing insert. H = 197 mm; J = 157 mm; L = 115 mm.
FY 50 FM SKF by SKF: flange bearing unit (square flange).
Dimensions according to drawing: Shaft diameter: 50 mm; L = 143 mm; J = 111 mm; N = 18 mm; Da = 125.4 mm; T = 60.7 mm; A1 = 43 mm
P 210 SNR by SNR: bearing housing.
Dimensions according to drawing: L = 206 mm; J = 159 mm; H = 57.2 mm; A = 60 mm; H2 = 114 mm; H1 = 22 mm
This KUVAL bearing housing carries the complete designation S 512. When replacing a part, compare its complete marking and brand with the assembly documentation.
Product rating
Be the first who will post an article to this item!
We can source almost any FAG product, even if you cannot find it in our online shop.
Send us the product designation and quantity required. We will check the price, availability and delivery options.
Enquire about FAG productsFAG – Product range and selection
The FAG range includes, for example: ball bearings, cylindrical and spherical roller bearings, tapered roller bearings.
Examples from our catalogue
- HCB 7006 CTP4SDUL FAG
- B7007 E 2RSD T P4S UL FAG
- UKP218-J7 FAG
What to include in your enquiry
- The full product designation, including all suffixes and specifications.
- The quantity required and, if relevant, when you need the part.
- Nameplate details, dimensions or a description of the application if the designation is unknown.
You can email a photo or drawing to info@Loziska-Policka.cz.
Your enquiry is non-binding. We will confirm the price, availability and delivery time for the specific product and discuss any alternative with you first.
Choose FAG bearings by the complete designation, including suffixes. The required design and operating conditions matter alongside the bearing dimensions.
Compare the complete specification
Check bore, outside diameter, width, internal clearance and the specified shielding or sealing. For a replacement, include the machine application and a photograph of the original marking.
Is a dimensionally identical bearing enough?
Verify the complete specification before substituting a bearing. Different suffixes can identify different designs; a similar reference alone does not confirm suitability.
Request a FAG quotation · Select bearings by designation or size
Availability and any replacement will be confirmed for the specific item.
| Manufacturing company : | Schaeffler Technologies AG & Co. KG |
|---|---|
| Address : | Industriestraße 1–3, 91074 Herzogenaurach, Germany |
| E-mail : | info@schaeffler.com |