Bearing unit - SNV290-F-L FAG

d 35 × H 47,6 × L 167 × J 127 × A 48 mm | N 17 × N1 21 mm
P 207 CRAFT is a cast-iron pillow-block unit with a long base for a 35 mm shaft, UC 207 insert, set-screw locking and M14 mounting bolts.

d 12 × H 30,2 × L 127 × A 38 × J 95 mm | N 13 × N1 18 mm
UCP 201 MTM is a cast-iron pillow block bearing unit for a 12 mm shaft with a UC 201 self-aligning insert bearing, grease nipple and two set screws.

62 × 108 × 32.5 mm
SKF FY 506 M separate four-bolt square flanged cast iron housing for an insert bearing; the insert bearing is not included.

P 208 MGK
Bearing unit for supporting a shaft in an assembly. Before ordering, verify the designation, dimensions and compatibility with the original part.

P 208 MGK housing only for a 40 mm shaft; standard H=49.2 mm, L=184 mm, J=137 mm, A=54 mm, N=17 mm, M14. UC208 insert not included; verify the variant.

d 30 × H 42,9 × L 160 × J 121 × A 44 mm | S1 17 × S2 20 mm
UCP 206 MTM is a cast-iron pillow block unit for a 30 mm shaft with a self-aligning insert bearing and two set screws.

UCF 207 MSC – d = 35 mm; L = 117 mm; J = 92 mm; A = 34 mm; B = 42,9 mm; S = 17,5 mm; M12.