Bearing unit - TME30-XL-N INA
Related products
PFT 47 SKF
Oval flanged pressed-steel housing for an insert bearing; H 91 mm, L 67 mm, J 71.4 mm, mounting hole N 8.7 mm. Insert bearing not included.
UCF 206 CN – d = 30 mm; L = 108 mm; J = 83 mm; B = 38.1 mm.
UKP216 FBJ
Bearing unit for supporting a shaft in an assembly. Before ordering, verify the designation, dimensions and compatibility with the original part.
P 208 MGK
Bearing unit for supporting a shaft in an assembly. Before ordering, verify the designation, dimensions and compatibility with the original part.
P 208 MGK housing only for a 40 mm shaft; standard H=49.2 mm, L=184 mm, J=137 mm, A=54 mm, N=17 mm, M14. UC208 insert not included; verify the variant.
Product detailed description
No product's description available
SY 40 TF SKF
Bearing unit for supporting a shaft in an assembly. Before ordering, verify the designation, dimensions and compatibility with the original part.
SKF SY 40 TF pillow-block unit for a 40 mm shaft; standard H=99 mm, J=88.9 mm, L=116 mm, mounting thread M12. Verify the exact variant.
d 30 × H 42,9 × L 165 × J 121 × A 48 mm | N 17 × N1 20 mm
UCP 206 D1 DPI is a cast-iron UCP200 pillow block unit for a 30 mm shaft with a UC206D1 insert bearing, grease fitting and two set screws.
d 40 × H 49,2 × L 184 × J 137 × A 54 mm | N 17 × N1 21 mm
P 208 LBC
P 208 LBC is a cast-iron plummer block unit with a long base for a 40 mm shaft, UC 208 insert bearing, set-screw locking and M14 mounting bolts.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any INA product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
INA – product identification and supply
The INA designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.
| Manufacturing company : | Schaeffler Technologies AG & Co. KG |
|---|---|
| Address : | Industriestraße 1–3, 91074 Herzogenaurach, Germany |
| E-mail : | info@schaeffler.com |