Bearing unit - TNN 218.ZL LBC
Related products
SY 40 TF SKF
Bearing unit for supporting a shaft in an assembly. Before ordering, verify the designation, dimensions and compatibility with the original part.
SKF SY 40 TF pillow-block unit for a 40 mm shaft; standard H=99 mm, J=88.9 mm, L=116 mm, mounting thread M12. Verify the exact variant.
UCFC 207 neu
Bearing unit for supporting a shaft in a mounting assembly. Check the designation, documentation or original part for dimensions and compatibility.
UCF 207 MSC – d = 35 mm; L = 117 mm; J = 92 mm; A = 34 mm; B = 42,9 mm; S = 17,5 mm; M12.
UL208 NTN
Bearing unit for supporting a shaft in an assembly. Before ordering, verify the designation, dimensions and compatibility with the original part. Bearing dimensions: 40 × 80 × 23 mm (inner diameter × outer diameter × width).
62 × 108 × 32.5 mm
SKF FY 506 M separate four-bolt square flanged cast iron housing for an insert bearing; the insert bearing is not included.
UCF 208 BBC – d = 40 mm; four-bolt flange unit; M14 mounting.
UKP216 FBJ
Bearing unit for supporting a shaft in an assembly. Before ordering, verify the designation, dimensions and compatibility with the original part.
UCP 205 CRAFT
Bearing unit for supporting a shaft in a mounting assembly. Check the designation, documentation or original part for dimensions and compatibility.
TECH_NOTE_UCP205CRAFTCast-iron CRAFT UCP 205 pillow block unit for a 25 mm shaft; H 36.5 mm, L 140 mm, J 105 mm, M10 bolt.
Product detailed description
No product's description available
80 × 102 × 38.5 mm
SKF FYTB 508 M separate two-bolt oval flanged cast iron housing for an insert bearing; the insert bearing is not included.
d 40 × a 130 × e 102 × i 21 × g 15 × l 36 × s 16 × z 51,2 × B 49,2 × n 19 mm
F 208 DPI is a cast-iron flange housing for a four-bolt UCF 208 unit with UC 208 insert for a 40 mm shaft and M14 mounting bolts.
d 35 × H 47,6 × L 167 × J 127 × A 48 mm | N 17 × N1 21 mm
P 207 CRAFT is a cast-iron pillow-block unit with a long base for a 35 mm shaft, UC 207 insert, set-screw locking and M14 mounting bolts.
d 30 · H 148 · L 80 · J 117 · A 31 · A2 40.2 mm
Complete two-bolt flanged SNR UCFL206 bearing unit with cast-iron FL206 housing, UC206G2 insert and M6×1 lubrication.
d 35 × H 47,6 × L 167 × J 127 × A 48 mm | S1 17 × S2 20 mm
UCP 207 MTM is a cast-iron pillow block unit for a 35 mm shaft with a self-aligning UC 207 insert bearing and two set screws for shaft locking.
UCFL 205 CRAFT
Bearing unit for supporting a shaft in an assembly. Before ordering, verify the designation, dimensions and compatibility with the original part. Unit dimensions: 25 mm (inner diameter), 130 mm (mounting-hole spacing) and 31 mm (width).
UCFL 205 CRAFT for a 25 mm shaft: spacing a=130 mm, e=99 mm, width B=34.1 mm, M14 mounting; UC205 insert and FL205 housing.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any LBC product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
LBC – product identification and supply
The LBC designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.