Bearing unit - UCFL 206 SNR
Related products
d 30 × H 42,9 × L 160 × J 121 × A 44 mm | S1 17 × S2 20 mm
UCP 206 MTM is a cast-iron pillow block unit for a 30 mm shaft with a self-aligning insert bearing and two set screws.
The HFH SNL 519-616 is a split plummer block housing designed to securely accommodate bearings, ensuring optimal performance and extended service life.
UL208 NTN
Bearing unit for supporting a shaft in an assembly. Before ordering, verify the designation, dimensions and compatibility with the original part. Bearing dimensions: 40 × 80 × 23 mm (inner diameter × outer diameter × width).
PFT 20 TF SKF
Two-hole oval flanged bearing unit with pressed-steel housing for a 20 mm shaft; H 91 mm, L 91 mm, J 71.4 mm, mounting hole N 8.7 mm.
PFT20_TECH_NOTEH 91 mm, L 91 mm, J 71.4 mm, hole N 8.7 mm, bearing bore d 20 mm.
Product detailed description
SNR UCFL206 is a complete two-bolt flanged bearing unit. The set contains the cast-iron FL206 housing and UC206G2 insert ball bearing with set-screw fixing and slinger seal.
Verified dimensions are shaft diameter d 30 mm, housing H 148 mm, L 80 mm, J 117 mm, A 31 mm, A2 40.2 mm, bearing width B 38.1 mm, e 18 mm, mounting hole N 16 mm and S 15.9 mm. The grease thread is M6×1; dynamic load rating C 19.5 kN, static C0 11.2 kN and mass approximately 0.89 kg. Compare the designation and mounting geometry before ordering.
SY 40 TF SKF
Bearing unit for supporting a shaft in an assembly. Before ordering, verify the designation, dimensions and compatibility with the original part.
SKF SY 40 TF pillow-block unit for a 40 mm shaft; standard H=99 mm, J=88.9 mm, L=116 mm, mounting thread M12. Verify the exact variant.
FYTB 30 TF SKF
Bearing unit for supporting a shaft in an assembly. Before ordering, verify the designation, dimensions and compatibility with the original part.
TECH_NOTE_FYTB30Two-hole oval flanged cast-iron SKF FYTB 30 TF unit for a 30 mm shaft; H 141.5 mm, J 116.5 mm, L 83 mm, holes N 11.5 mm.
d 40 × H 49,2 × L 184 × J 137 × A 54 mm | N 17 × N1 21 mm
P 208 LBC
P 208 LBC is a cast-iron plummer block unit with a long base for a 40 mm shaft, UC 208 insert bearing, set-screw locking and M14 mounting bolts.
UCF 210 MTM
Bearing unit for supporting a shaft in a mounting assembly. Check the designation, documentation or original part for dimensions and compatibility.
UCP 205 CRAFT
Bearing unit for supporting a shaft in a mounting assembly. Check the designation, documentation or original part for dimensions and compatibility.
TECH_NOTE_UCP205CRAFTCast-iron CRAFT UCP 205 pillow block unit for a 25 mm shaft; H 36.5 mm, L 140 mm, J 105 mm, M10 bolt.
UCP 210 MTM
Bearing unit for supporting a shaft in a mounting assembly. Check the designation, documentation or original part for dimensions and compatibility.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any SNR product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
SNR – product identification and supply
The SNR designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.
| Manufacturing company : | NTN Europe |
|---|---|
| Address : | 1 rue des Usines, B.P. 2017, 74010 Annecy, France |
| E-mail : | mailing.contact@ntn-snr.fr |