Bearing unit - UCP214T20 SNR
Related products
d 35 × H 47,6 × L 167 × J 127 × A 48 mm | N 17 × N1 21 mm
P 207 CRAFT is a cast-iron pillow-block unit with a long base for a 35 mm shaft, UC 207 insert, set-screw locking and M14 mounting bolts.
PFT 52 SKF
Bearing unit for supporting a shaft in an assembly. Before ordering, verify the designation, dimensions and compatibility with the original part.
TECH_NOTE_PFT52Oval flanged pressed-steel SKF PFT 52 housing for an insert bearing; H 95 mm, L 71 mm, J 76.2 mm, hole N 8.7 mm. Insert bearing not included.
UCP 205 CRAFT
Bearing unit for supporting a shaft in a mounting assembly. Check the designation, documentation or original part for dimensions and compatibility.
TECH_NOTE_UCP205CRAFTCast-iron CRAFT UCP 205 pillow block unit for a 25 mm shaft; H 36.5 mm, L 140 mm, J 105 mm, M10 bolt.
UKP216 FBJ
Bearing unit for supporting a shaft in an assembly. Before ordering, verify the designation, dimensions and compatibility with the original part.
UCF 208 BBC – d = 40 mm; four-bolt flange unit; M14 mounting.
d 12 × H 30,2 × L 127 × A 38 × J 95 mm | N 13 × N1 18 mm
UCP 201 MTM is a cast-iron pillow block bearing unit for a 12 mm shaft with a UC 201 self-aligning insert bearing, grease nipple and two set screws.
Product detailed description
No product's description available
80 × 102 × 38.5 mm
SKF FYTB 508 M separate two-bolt oval flanged cast iron housing for an insert bearing; the insert bearing is not included.
P 208 MGK
Bearing unit for supporting a shaft in an assembly. Before ordering, verify the designation, dimensions and compatibility with the original part.
P 208 MGK housing only for a 40 mm shaft; standard H=49.2 mm, L=184 mm, J=137 mm, A=54 mm, N=17 mm, M14. UC208 insert not included; verify the variant.
UL208 NTN
Bearing unit for supporting a shaft in an assembly. Before ordering, verify the designation, dimensions and compatibility with the original part. Bearing dimensions: 40 × 80 × 23 mm (inner diameter × outer diameter × width).
RUS 26126 GR3/-10-15 INA
Bearing unit for supporting a shaft in a mounting assembly. Check the designation, documentation or original part for dimensions and compatibility.
INA RUS 26126 GR3/-10-15 linear recirculating roller unit for linear guidance; parameters d=126.5 mm, D=39.975 mm, B=25.99 mm. Verify guide-rail compatibility.
UCF 210 MTM
Bearing unit for supporting a shaft in a mounting assembly. Check the designation, documentation or original part for dimensions and compatibility.
FYC 508 SKF
Bearing unit for supporting a shaft in an assembly. Before ordering, verify the designation, dimensions and compatibility with the original part.
TECH_NOTE_FYC508Round four-hole cast-iron flanged FYC 508 SKF housing/unit; Da 80 mm, J 120 mm, L 145 mm, mounting holes N 14 mm.
d 40 × a 130 × e 102 × i 21 × g 15 × l 36 × s 16 × z 51,2 × B 49,2 × n 19 mm
F 208 DPI is a cast-iron flange housing for a four-bolt UCF 208 unit with UC 208 insert for a 40 mm shaft and M14 mounting bolts.
UCF 207 MSC – d = 35 mm; L = 117 mm; J = 92 mm; A = 34 mm; B = 42,9 mm; S = 17,5 mm; M12.
UCFC 207 neu
Bearing unit for supporting a shaft in a mounting assembly. Check the designation, documentation or original part for dimensions and compatibility.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any SNR product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
SNR – product identification and supply
The SNR designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.
| Manufacturing company : | NTN Europe |
|---|---|
| Address : | 1 rue des Usines, B.P. 2017, 74010 Annecy, France |
| E-mail : | mailing.contact@ntn-snr.fr |