QVPX14V060SEM
Unsure if the part fits? Send us the designation, dimensions or a photo.
Send an inquiryRelated products
This KUVAL product carries the complete designation S 511. When replacing a part, compare its complete marking and brand with the assembly documentation.
UCFC 208 BBC by BBC: flange bearing unit (round flange).
Dimensions according to drawing: Shaft diameter: 40 mm; a = 145 mm; p = 120 mm
This Benn product carries the complete designation RL 95. When replacing a part, compare its complete marking and brand with the assembly documentation.
F 208 NTN is a one-piece cast iron bearing housing with a square flange and four fixing holes. It is a housing for assembling a bearing arrangement; F 208 alone does not designate a complete UCF208 unit.
P 210 SNR by SNR: bearing housing.
Dimensions according to drawing: L = 206 mm; J = 159 mm; H = 57.2 mm; A = 60 mm; H2 = 114 mm; H1 = 22 mm
This NTN product carries the complete designation UCFL 204 J. When replacing a part, compare its complete marking and brand with the assembly documentation.
This KUVAL product carries the complete designation S 617. When replacing a part, compare its complete marking and brand with the assembly documentation.
QVVPX28V125SET by Timken: spherical roller bearing housed unit with a solid-block housing.
Dimensions according to drawing: Shaft diameter: 125 mm; L = 175.0 mm; J = 24 mm; H = 50.8 mm; A = 155.6 mm; B = 293.4 mm; E = 108.0 mm
UCP 208 DPI is a complete pillow block bearing unit for a 40 mm shaft. It combines bearing UC208 with cast-iron housing P208; set-screws lock the inner ring to the shaft.
This KUVAL product carries the complete designation S 613. When replacing a part, compare its complete marking and brand with the assembly documentation.
SY 30 TF SKF by SKF: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 30 mm; L = 152 mm; J = 117.5 mm; H = 82.5 mm; A = 40 mm; H2 = 17 mm; H1 = 42.9 mm
Separate oval two-bolt flange housing for assembling an arrangement with a bearing insert. H = 197 mm; J = 157 mm; L = 115 mm.
This NTN product carries the complete designation UCCFC 212. When replacing a part, compare its complete marking and brand with the assembly documentation.
UCP 206 BBC by BBC: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 30 mm; h = 42.9 mm; a = 160 mm; e = 121 mm
Product detailed description
QVPX14V060SEM by Timken: spherical roller bearing housed unit with a solid-block housing.
Technical specifications
- Designation: QVPX14V060SEM
- Manufacturer: Timken
- Shaft diameter: 60 mm
- E: 66.8 mm
- J: 16 mm
- L: 101.3 mm
- C: 94.0 mm
- G: 98.6 mm
- A: 76.2 mm
- B: 153.7 mm
- D min.: 176.3 mm
- Sv: 81.0 mm
- F: 285.8 mm
- H: 31.0 mm
- D max.: 242.8 mm
- Housing material: cast steel
- Housing mounting: four-bolt pillow block (5000)
- Shaft locking: V-Lock; single nut
- Sealing: triple-lip seal (NBR)
- Axial arrangement: expansion arrangement
Before installation, check the dimensions, bearing arrangement and operating conditions against the manufacturer’s documentation. Follow the manufacturer’s installation and maintenance instructions.
Additional parameters
| Category: | Bearing housings |
|---|---|
| Weight: | 10 kg |
| Axiální rozměr L podle katalogu (mm): | 101.3 |
| Délka základny domku (mm): | 285.8 |
| Shaft diameter (mm): | 60 |
| Šířka ložiskové části jednotky (mm): | 81 |
| Šířka základny domku (mm): | 98.6 |
| Výška domku (mm): | 153.69999999999999 |
| Výška osy hřídele (mm): | 76.2 |
P 204 J NTN is a standalone pillow-block housing for a matching insert bearing.
Split plummer block housing SN 513 DPI. Shaft diameter: 60 mm; L = 275 mm.
FYC 508 SKF by SKF: flanged bearing housing (round flange).
Dimensions according to drawing: L = 145 mm; J = 120 mm; N = 14 mm; Da = 100 mm; A1 = 36 mm; A3 = 10 mm
RCJTY 20 N INA by INA: flange bearing unit.
Dimensions according to drawing: Shaft diameter: 20 mm; L = 61 mm; H = 112 mm; N = 11.5 mm; A1 = 10 mm
SN 510 SLB is a split plummer block housing for an arrangement with a separately selected bearing.
UCFL 206 ASAHI is a complete flanged bearing unit for a 30 mm shaft. It combines bearing UC206 with cast-iron housing FL206 and locks to the shaft using set-screws.
UCF 210 MTM by MTM: flange bearing unit.
Dimensions according to drawing: Shaft diameter: 50 mm; a = 143 mm; e = 111 mm; i = 22 mm; g = 18 mm; l = 40 mm; S = 16 mm
UCFC 213 ASAHI is a round flanged bearing unit with spigot joint for a 65 mm shaft. Shaft locking: set screws.
UCP 207 MTM by MTM: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 35 mm; h = 47.6 mm; a = 167 mm; e = 127 mm; b = 48 mm; S1 = 17 mm; S2 = 20 mm
This KUVAL product carries the complete designation S 516. When replacing a part, compare its complete marking and brand with the assembly documentation.
This KUVAL product carries the complete designation S 616. When replacing a part, compare its complete marking and brand with the assembly documentation.
This KUVAL product carries the complete designation S 612. When replacing a part, compare its complete marking and brand with the assembly documentation.
PCJT 20 INA is an oval flanged bearing unit for a 20 mm shaft, mounted by two bolts. It uses an eccentric locking collar to secure the shaft and has P seals.
Split plummer block housing SNH 512 610 SKF. Da = 110 mm; L = 255 mm; J = 210 mm.
UCF 207 MSC by MSC: flange bearing unit (square flange).
Dimensions according to drawing: Shaft diameter: 35 mm; L = 117 mm
Product rating
Be the first who will post an article to this item!
We can source almost any TIMKEN product, even if you cannot find it in our online shop.
Send us the product designation and quantity required. We will check the price, availability and delivery options.
Enquire about TIMKEN productsTIMKEN – Product range and selection
The TIMKEN range includes, for example: ball bearings, cylindrical and spherical roller bearings, tapered roller bearings, bearing units.
Examples from our catalogue
- 32208 TIMKEN
- 22308 CJW33 TIMKEN
- 33014 M TIMKEN
What to include in your enquiry
- The full product designation, including all suffixes and specifications.
- The quantity required and, if relevant, when you need the part.
- Nameplate details, dimensions or a description of the application if the designation is unknown.
You can email a photo or drawing to info@Loziska-Policka.cz.
Your enquiry is non-binding. We will confirm the price, availability and delivery time for the specific product and discuss any alternative with you first.
Choose TIMKEN bearings by the complete designation and the components required. Distinguish a complete bearing from a separately supplied component before requesting a quotation.
Specify the complete bearing arrangement
For a tapered roller bearing, include the cone and cup references where specified. For other bearing designs, preserve the complete marking and suffixes. Add the required quantity and dimensions of the original part.
Is one ring reference enough for a complete set?
Check the supplied components against the original specification. A reference may identify only one component, so a complete set must not be assumed. Send photographs of both ring markings if the information is incomplete.
Request a TIMKEN quotation · Select bearings by designation or size
Availability and any replacement will be confirmed for the specific item.
| Manufacturing company : | Timken Europe |
|---|---|
| Address : | 2 Rue Timken, 68002 Colmar Cedex, France |