2MV9114WIPRLDUM

Bearing - RNU 228 M (vnitřní kroužek: 168,30 mm) neu

140 × 250 × 42 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - 609 2Z ZKL

9 × 24 × 7 mm. single-row deep groove ball bearing with non-contact metal shields on both sides. Suitable for radial and moderate axial loads in both directions, combining low friction with protection of the lubricant from larger contaminants.

Bearing - 624 ZKL

4 × 13 × 5 mm. single-row deep groove ball bearing in an open design. Deep raceways carry radial and moderate axial loads in both directions with low friction.

Bearing - 61903 2RS ZVL

17 × 30 × 7 mm. Rubber seals on both sides. Thin-section ZVL single-row deep groove ball bearing for installations with limited radial space.

Bearing - 6000 2RSH SKF

10 × 26 × 8 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.

Bearing - 608 2Z SKF

8 × 22 × 7 mm. Single-row SKF bearing with non-contact metal shields on both sides (2Z) and normal radial clearance CN. Check the complete designation before ordering.

Bearing - 6407 SKF

35 × 90 × 23 mm. Rolling bearing for use in machinery and equipment.

Bearing - 6407 N ZVL

35 × 90 × 23 mm. Rolling bearing for use in machinery and equipment.

Bearing - NU 22 32 EN C6 ZKL

NU 22/32 EN C6 ZKL ZKL cylindrical roller bearing with a specific complete designation. Mounting dimensions are not stated in the available product data; verify them from the original bearing before ordering.