32021XDFC150

Bearing - 3208 ZKL

40 × 80 × 30 mm. double-row angular contact ball bearing for combined radial and axial loads in both directions. Its compact design provides rigid and accurate shaft guidance.

Bearing - RNU 228 M (168 × 250 × 42 mm) NEU

168 × 250 × 42 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - 6002 2RS FAG

15 × 32 × 9 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.

Bearing - 6202 ZKL

15 × 35 × 11 mm. single-row deep groove ball bearing in open design. A compact bearing for radial and moderate axial loads in both directions, intended for arrangements providing their own lubrication and protection.

Bearing - NJ 2311 M SRO

55 × 120 × 43 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - NU1040-XL-M1 FAG

Bearing - is a single-row cylindrical roller bearing in NU design with a solid brass M1 cage, cylindrical bore, no seals and normal. Cn clearance. It is an X-Life bearing. Dimensions: inner diameter d 200 mm, outer diameter D 310 mm, width B 51 mm; weight 14.6 kg. NU bearings carry radial forces and allow axial displacement in both directions, making them suitable as floating….

Bearing - 624 P5 TPX ZKL

4 × 13 × 5 mm. bearing with increased P5 precision. Catalogue brand: TPX; compare the complete designation and physical marking before replacement.

Bearing - 61903 2RS ZVL

17 × 30 × 7 mm. Rubber seals on both sides. Thin-section ZVL single-row deep groove ball bearing for installations with limited radial space.

Bearing - 624 ZKL

4 × 13 × 5 mm. single-row deep groove ball bearing in an open design. Deep raceways carry radial and moderate axial loads in both directions with low friction.