32944DFC300
Product detailed description
Tapered roller bearing. Manufacturer: TIMKEN. Designation: 32944DFC300. Price for 1 piece.
Bearing - 30209 A KLF-ZVL
45 × 85 × 20.75 mm. tapered roller bearing for combined radial and axial loads.
Bearing - 61901 2RS ZVL
12 × 24 × 6 mm. Rubber seals on both sides.
Bearing - 32209 A KLF
Bearing.
Bearing - NU 22 32 EN C6 ZKL
NU 22/32 EN C6 ZKL ZKL cylindrical roller bearing with a specific complete designation. Mounting dimensions are not stated in the available product data; verify them from the original bearing before ordering.
Bearing - 6006 2RS ZVL
30 × 55 × 13 mm. Single-row deep-groove ball bearing with rubber seals on both sides. Check the complete designation and suitability for the specific application.
Bearing - PLC 64 2 ZKL
Bearing.
Bearing - RNU 228 M (vnitřní kroužek: 168,30 mm) neu
140 × 250 × 42 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - 61903 2RS ZVL
17 × 30 × 7 mm. Rubber seals on both sides. Thin-section ZVL single-row deep groove ball bearing for installations with limited radial space.
Bearing - 624 ZKL
4 × 13 × 5 mm. single-row deep groove ball bearing in an open design. Deep raceways carry radial and moderate axial loads in both directions with low friction.
Bearing - 6200 2RS SKF
10 × 30 × 9 mm. single-row deep-groove ball bearing with rubber seals on both sides. For radial loads and limited axial loads in either direction.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any TIMKEN product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
TIMKEN – product identification and supply
The TIMKEN designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.
| Manufacturing company : | Timken Europe |
|---|---|
| Address : | 2 Rue Timken, 68002 Colmar Cedex, France |