3306A-2RS1TN9/C3MT33

Bearing - 624 P5 TPX ZKL

4 × 13 × 5 mm. bearing with increased P5 precision. Catalogue brand: TPX; compare the complete designation and physical marking before replacement.

Bearing - 6307 ZKL

35 × 80 × 21 mm. single-row deep groove ball bearing in an open design. Deep raceways carry radial and moderate axial loads in both directions with low friction.

Bearing - 3206 ZKL

30 × 62 × 23 mm. double-row angular contact ball bearing for combined radial and axial loads in both directions. Its compact design provides rigid and accurate shaft guidance.

Bearing - 6304 2RS GS

20 × 52 × 15 mm. GS bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.

Bearing - 6200 2RS SKF

10 × 30 × 9 mm. single-row deep-groove ball bearing with rubber seals on both sides. For radial loads and limited axial loads in either direction.

Bearing - 626 2Z FAG

6 × 19 × 6 mm. is a single-row deep-groove ball bearing with two non-contact metal shields. Its versatile design supports radial load and moderate axial loads in both directions, while low friction makes it suitable for higher speeds. The shields help retain lubricant and limit the entry of larger contaminants. This is a general-purpose machine bearing, not a contact-sealed or watertight design.

Bearing - NU 224 E XL M1 FAG

120 × 215 × 40 mm. FAG bearing with the complete designation. When selecting a replacement, compare the full designation, dimensions and design required for the application.

Bearing - 61901 2RS ZVL

12 × 24 × 6 mm. Rubber seals on both sides.

Bearing - 6200 Z ZKL

10 × 30 × 9 mm. single-row deep groove ball bearing with a non-contact metal shield on one side. Suitable for radial and moderate axial loads in both directions when one side of the bearing needs protection from coarse contamination.