Bearings
Product sorting
List of products
Bearing - 6412 ZKL
60 × 150 × 35 mm. Open deep-groove ball bearing.
Bearing - 32217 A ZKL
85 × 150 × 38.5 mm. single-row tapered roller bearing for high combined radial and one-direction axial loads.
Bearing - 6314/C3VL0241 SKF
SKF single-row deep groove ball bearing with VL0241 electrically insulated outer ring, cylindrical bore and C3 clearance. 70 × 150 × 35 mm; VL0241; no seal.
Bearing - 6412A MA C3 ZKL
60 × 150 × 35 mm. Bearing with increased radial internal clearance C3.
Bearing - 6412 N ZKL
60 × 150 × 35 mm. Single-row deep-groove ball bearing for radial and axial loads in both directions. The N design has a snap-ring groove in the outer ring; when replacing, retain the complete designation and verify the axial locating method.
Bearing - B7020 E T P4S UM FAG
FAG B7020-E-T-P4S-UM single-row angular contact precision ball bearing, 100 × 150 × 24 mm.
Bearing - 30314 A ZKL
70 × 150 × 35 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - 6217 FLT
85 × 150 × 28 mm. Rolling bearing for use in machinery and equipment.
Bearing - 6020 ZKL
100 × 150 × 24 mm. Bearing for use in machinery and equipment.
Bearing - QJ 217 MA SKF
85 × 150 × 28 mm. SKF bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.
Bearing - 30217 SKF
85 × 150 × 30.5 mm. Bearing is a precisely identified SKF product. Before ordering, compare the complete designation, dimensions and application requirements.
Bearing - NU 2217 E M1 C3 FAG
85 × 150 × 36 mm. Greater radial internal clearance.
Bearing - RNA 4824 JNS
130 × 150 × 30 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - RNA4824 TORRINGTON
130 × 150 × 30 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - RNA4824 IKO
130 × 150 × 30 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - NU 314 ECJ C3 SKF
70 × 150 × 35 mm. Greater radial internal clearance SKF bearing with the complete designation.
Bearing - N 314 NA URB
70 × 150 × 35 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - 6314 2Z C3 SKF
70 × 150 × 35 mm. Metal shields on both sides. Greater radial internal clearance.
Practical advice
How to choose the right bearing
The same dimensions do not necessarily mean the same function. When selecting a replacement, check the construction, cover and seal design, internal clearance, and the conditions in which the bearing will operate.
Determine the type and size
Copy the full type designation. If missing, measure the inner diameter d, outer diameter D and width B.
Check the design
Distinguish open bearing, metal shields, and rubber seals. Also check internal clearance, accuracy, cage, and lubricant.
Take operating conditions into account
Rotational speed, direction, and magnitude of mechanical load, temperature, humidity, dust, and the method of installation are decisive.
How to read the type designation 6204 2RS C3
Suffixes may vary between manufacturers. When replacing, compare technical parameters, not just similar type designation.
Open, 2Z, or 2RS?
When are matching dimensions not enough?
A dimensionally identical bearing may have different load capacity, maximum speed, precision, or internal clearance. Pay special attention to electric motors, high temperatures, vibrations, shocks, and dusty or humid environments.
- radial, axial, and combined loads
- normal or increased internal clearance C3/C4
- operating temperature and maximum speed
- design of shields and seals, lubricant, cage material, and precision
Frequently asked questions
Can I replace a bearing with another brand?
Usually yes, if the design type, dimensions, internal clearance, precision, cover and seal design, load capacity, and allowable speeds match. The basic number alone is not enough; the meaning of the suffixes may vary according to the manufacturer.
How do I determine the diameter of the inner bore from the model designation?
For many common metric bearings, the bore diameter code from 04 is multiplied by five: for example, 04 = 20 mm and 06 = 30 mm. Codes 00 to 03 and some special designs have different rules, so it is advisable to verify the dimension.
Is 2RS better, or 2Z?
Neither is universally better. 2RS usually protects better against dirt and moisture, while 2Z tends to have lower friction and allows higher speeds. The right choice depends on the application.
What to send if the type designation is unreadable?
A photo of both sides, dimensions d × D × B, machine type, and information about speed, load, temperature, humidity, or dustiness. The more operational data we know, the more safely a replacement can be recommended.
Not sure about the replacement?
Send the type designation, dimensions, or a photo of the original part. We will help verify the suitable version before ordering.