Bearings
Product sorting
List of products
Bearing - 22312 KJB ZKL
60 × 130 × 46 mm. Double-row spherical roller bearing for high radial loads and axial loads in both directions.
Bearing - 22312 KM ZKL
60 × 130 × 46 mm. double-row spherical roller bearing with a 1:12 tapered bore and machined brass cage. For high radial and axial loads in either direction; accommodates angular misalignment.
Bearing - 22312 KW33J ZKL
60 × 130 × 46 mm. double-row spherical roller bearing with a 1:12 tapered bore, W33 lubrication groove and three holes, and a J steel cage. The self-aligning design carries high radial loads together with axial loads in both directions.
Bearing - 22220EK SKF
100 × 180 × 46 mm. SKF bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.
Bearing - NU 2220 E XL M1 FAG
FAG NU2220-E-XL-M1 single-row cylindrical roller bearing for high radial loads in applications without axial load support.
Bearing - 2312 SKF
60 × 130 × 46 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - 2220 ZVL
100 × 180 × 46 mm. ZVL bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.
Bearing - ZARN 2052 TV A INA
combined needle roller and axial cylindrical roller bearing for high radial and axial loads.
Bearing - 22312 JW33C3 ZKL
60 × 130 × 46 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - 22312 M C3 SRO
60 × 130 × 46 mm. Greater radial internal clearance.
Bearing - 22312 J URB
60 × 130 × 46 mm. · URB bearing.
Bearing - 22312 E C3 W33 SKF
60 × 130 × 46 mm. Greater radial internal clearance. Lubrication groove and lubrication holes in the outer ring.
Bearing - 22220 KMW33C3 ZKL
100 × 180 × 46 mm. Bearing for industrial rotating assemblies. Before selection, verify the complete designation, dimensions and requirements of the specific application.
Bearing - 22312 W33M ZKL
60 × 130 × 46 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - NU 2220 E TVP2 C3 FAG
100 × 180 × 46 mm. FAG bearing with the complete designation and increased radial internal clearance. Verify the complete designation, dimensions and internal-clearance requirement before ordering.
Bearing - NJ 2312 STEYR
60 × 130 × 46 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - NJ 2312 M FAG
60 × 130 × 46 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - 2312 TV FAG
60 × 130 × 46 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Practical advice
How to choose the right bearing
The same dimensions do not necessarily mean the same function. When selecting a replacement, check the construction, cover and seal design, internal clearance, and the conditions in which the bearing will operate.
Determine the type and size
Copy the full type designation. If missing, measure the inner diameter d, outer diameter D and width B.
Check the design
Distinguish open bearing, metal shields, and rubber seals. Also check internal clearance, accuracy, cage, and lubricant.
Take operating conditions into account
Rotational speed, direction, and magnitude of mechanical load, temperature, humidity, dust, and the method of installation are decisive.
How to read the type designation 6204 2RS C3
Suffixes may vary between manufacturers. When replacing, compare technical parameters, not just similar type designation.
Open, 2Z, or 2RS?
When are matching dimensions not enough?
A dimensionally identical bearing may have different load capacity, maximum speed, precision, or internal clearance. Pay special attention to electric motors, high temperatures, vibrations, shocks, and dusty or humid environments.
- radial, axial, and combined loads
- normal or increased internal clearance C3/C4
- operating temperature and maximum speed
- design of shields and seals, lubricant, cage material, and precision
Frequently asked questions
Can I replace a bearing with another brand?
Usually yes, if the design type, dimensions, internal clearance, precision, cover and seal design, load capacity, and allowable speeds match. The basic number alone is not enough; the meaning of the suffixes may vary according to the manufacturer.
How do I determine the diameter of the inner bore from the model designation?
For many common metric bearings, the bore diameter code from 04 is multiplied by five: for example, 04 = 20 mm and 06 = 30 mm. Codes 00 to 03 and some special designs have different rules, so it is advisable to verify the dimension.
Is 2RS better, or 2Z?
Neither is universally better. 2RS usually protects better against dirt and moisture, while 2Z tends to have lower friction and allows higher speeds. The right choice depends on the application.
What to send if the type designation is unreadable?
A photo of both sides, dimensions d × D × B, machine type, and information about speed, load, temperature, humidity, or dustiness. The more operational data we know, the more safely a replacement can be recommended.
Not sure about the replacement?
Send the type designation, dimensions, or a photo of the original part. We will help verify the suitable version before ordering.