Bearing - 1308 ETN9 SKF

45x85x30 mm

Double-row angular contact ball bearing 3209 ZKL for combined radial loads and axial loads in both directions. A robust solution for arrangements requiring good rigidity and accurate shaft guidance.

Self-aligning ball bearing 2306 E 2RS1TN9 SKF has two rows of balls and a common spherical raceway in the outer ring. This design accommodates static and dynamic misalignment between the shaft and housing.

Seals on both sides help protect the bearing interior from contaminants. It is suitable for arrangements where shaft deflection or mounting misalignment can occur.

61903 2RS1 SKF deep-groove ball bearing is a single-row bearing with contact rubber seals on both sides. It carries radial loads and moderate axial loads in both directions, while the factory grease is protected against leakage and common contaminants.

32208 FBJ tapered roller bearing is a separable single-row bearing for high radial loads combined with axial load in one direction. Two bearings in an opposed arrangement are normally used when axial location is required in both directions.

NN 3022 KP 52 ZKL double-row cylindrical roller bearing is a precision radial bearing with a tapered bore, P5 accuracy and reduced C2 internal clearance. Its high radial load capacity and rigidity make it particularly suitable for precision spindles and other demanding machine arrangements.

35x100x25 mm

Single-row cylindrical roller bearing NJ 407 ZKL for high radial loads with axial shaft location in one direction. The NJ design permits axial displacement in the opposite direction; when replacing, compare the complete designation and required internal clearance.

6208 2Z C3 SKF deep-groove ball bearing is a single-row bearing with steel shields on both sides and C3 radial internal clearance. It carries radial loads and moderate axial loads in both directions and is suitable for higher-speed operation.

2302 2RS CODEX self-aligning ball bearing has two rows of balls and a spherical raceway in the outer ring, allowing it to compensate for angular misalignment between the shaft and housing. Rubber seals on both sides protect the factory grease and the bearing interior against common contaminants.

1210 K ZKL self-aligning ball bearing has two rows of balls, a spherical outer-ring raceway and a tapered bore. It accommodates angular misalignment between shaft and housing and can be mounted directly on a tapered journal or with a matching adapter sleeve.

12x28x11 mm

Single-direction thrust ball bearing 51201 URB for carrying axial load in one direction. Its separable design simplifies installation of the individual washers and ball-and-cage assembly; when replacing, compare the complete designation, dimensions and load direction.