Bearing - 22328 CC W33 SKF
Related products
16x22x12 mm
Thin-walled HK 1612 neu drawn cup needle roller bearing with open ends for compact radial arrangements.
15.875x42.862x14.288 mm
NEU 11590/11520 single-row tapered roller bearing for combined radial and axial load in one direction. The separable cone-and-cup design simplifies mounting and precise adjustment of the bearing arrangement.
10x30x9 mm
6200 2Z MSC deep-groove ball bearing with metal shields on both sides.
25x42x17 mm
DKF NU 4905 single-row cylindrical roller bearing in NU design for high radial loads. The outer ring has two integral flanges and the inner ring has no flanges, allowing axial displacement of the shaft relative to the housing in both directions.
17x35x10 mm
F 6003 2RS neu deep-groove ball bearing with rubber seals on both sides.
25x62x17 mm
ZKL 6305 single-row deep-groove ball bearing in an open design.
For radial loads and limited axial loads in either direction.
17x35x10 mm
ZVL 6003 2RS single-row deep-groove ball bearing with rubber seals on both sides. A versatile design for radial and limited axial loads in both directions, protected against common contaminants.
12x37x12 mm
ZKL 6301 2Z single-row deep groove ball bearing with non-contact metal shields on both sides. Dynamic load rating 9.8 kN, mass 0.06 kg.
15x32x9 mm
Single-row SKF 6002-2RSH deep groove ball bearing in SKF Explorer performance class. NBR contact seals on both sides help retain the grease and protect the bearing against contamination.
17x40x12 mm
ZKL 1203 double-row self-aligning ball bearing with a cylindrical bore and open design.
Accommodates shaft-to-housing misalignment; for radial and light axial loads in either direction.
60x130x46 mm
ZKL 22312 KW33J double-row spherical roller bearing with a 1:12 tapered bore, W33 lubrication groove and three holes, and a J steel cage. The self-aligning design carries high radial loads together with axial loads in both directions.
17x30x7 mm
Rubber seals on both sides. Thin-section ZVL single-row deep groove ball bearing for installations with limited radial space.
25x52x15 mm
Contact seals of synthetic rubber (NBR) on both sides. Versatile SKF deep groove ball bearing for protected arrangements.
30x72x19 mm
Rubber seals on both sides
Greater C3 radial internal clearance. Robust SKF single-row deep groove ball bearing for demanding rotating assemblies.
17x35x10 mm
Single-row ZKL 6003-RS deep groove ball bearing with a rubber seal on one side. The sealed side helps protect the lubricant, while the opposite side remains open for the lubrication method defined by the bearing arrangement.
Product detailed description
22328 CC/W33 SKF — double-row spherical roller bearing. A precisely specified industrial bearing for demanding service, maintenance and new machinery.
Technical data
- Designation: 22328 CC/W33
- Manufacturer: SKF
- Bearing type: double-row spherical roller bearing
- Dimensions d × D × B: 140 × 300 × 102 mm
- Design and matching: CC · W33
Checks before ordering and installation
Compare the complete designation character by character, dimensions, arrangement, clearance or preload, fits and lubrication with the original part and the manufacturer's documentation.
If you are unsure, send us the complete designation and operating data; we will help verify compatibility.
17x35x10 mm
SKF 6003-2RSH/C3 single-row deep groove ball bearing with greater C3 radial internal clearance and NBR contact seals on both sides. It is grease filled and protected against contamination.
17x35x10 mm
6003 2Z FLT deep-groove ball bearing with metal shields on both sides.
35x80x32.75 mm
CRB 32307 single-row tapered roller bearing for high combined radial and axial loads. The separable inner-ring cone with rollers and outer-ring cup allow precise mounting and clearance or preload adjustment.
45x85x20.75 mm
30209 A KLF-ZVL tapered roller bearing for combined radial and axial loads.
12x37x12 mm
6301 2RS ZVL deep-groove ball bearing with rubber seals on both sides.
30x47x9 mm
61906 2RS ZVL deep-groove ball bearing with rubber seals on both sides.
25x52x15 mm
Metal shields on both sides. Versatile FAG single-row deep groove ball bearing with non-contact shielding.
30x47x9 mm
Thin-section, single-row NTN 6906 2RS deep groove ball bearing with contact rubber seals on both sides, CN clearance and a pressed-steel cage. The compact design is intended for sealed arrangements with limited radial space.
5x13x4 mm
Miniature single-row IBB 695 2Z deep groove ball bearing with non-contact sheet-steel shields on both sides. A compact design for small mechanisms requiring low friction and protection of the lubricant from ordinary contaminants.
20x52x16.25 mm
DPI 30304 single-row tapered roller bearing for combined radial and axial loads. The separable cone with rollers and outer-ring cup simplify mounting and precise clearance or preload adjustment.
30x47x13 mm
Special INA FE04-224.61906 single-row deep groove ball bearing with contact rubber seals on both sides. Mass 0.073 kg.
25x52x27.2 mm
SKF YAT 205 insert ball bearing with a narrow inner ring extended on one side and locking by two set screws. Standard contact seals on both sides protect the grease and bearing interior.
45x85x19 mm
6209 2RS SKF deep-groove ball bearing with rubber seals on both sides.
25x37x7 mm
Single-row SKF 61805 2RS deep groove ball bearing with compact dimensions; the corresponding SKF catalogue designation is 61805-2RS1. Contact seals on both sides help retain the grease and protect the bearing against contamination.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any SKF product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
SKF – product identification and supply
The SKF designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.
| Manufacturing company : | AB SKF (publ) |
|---|---|
| Address : | Sven Wingquists Gata 2, SE-415 50 Göteborg, Sweden |
| E-mail : | skf.cz@skf.com |