Bearing - 23220 CC W33 SKF

10x19x5 mm
MTM 61800 2Z thin-section single-row deep-groove ball bearing with non-contact metal shields on both sides for compact arrangements, low friction and protection from ordinary contaminants.

70x110x25 mm

Robust single-row tapered roller bearing 32014 AX KLF ZVL for combined radial and one-direction axial loads. Its separable design simplifies installation and allows precise adjustment of operating clearance or preload.

40x80x23 mm

NU 2208 E ZVL is a single-row cylindrical roller bearing for high radial loads. The NU design permits axial displacement of the shaft relative to the housing in both directions and is suited to non-locating positions.

10x30x9 mm

6200 2RS ZVL is a single-row deep-groove ball bearing with contact rubber seals on both sides. It supports radial and limited axial loads while protecting the lubricant and raceways in commonly contaminated operation.

30x72x19 mm

6306 2Z TIMKEN is a single-row deep-groove ball bearing with two non-contact metal shields. Its versatile design supports radial load and moderate axial loads in both directions, while low friction makes it suitable for higher speeds.

The shields help retain lubricant and limit the entry of larger contaminants. This is a general-purpose machine bearing, not a contact-sealed or watertight design.

30x72x19 mm
SKF 6306-2Z/C3 single-row deep-groove ball bearing with non-contact metal shields on both sides and greater-than-normal C3 radial clearance.

50x75x35 mm
Radial spherical plain bearing GE 50 E 2RS ZVL for oscillating motion and angular misalignment
Rubber seals on both sides; verify the complete designation and lubrication regime before ordering.

10x26x8 mm
KINEX 6000 2RS single-row deep-groove ball bearing with contact rubber seals on both sides. The closed design helps retain lubricant and protects the raceways from contamination and moisture.

35x72x18.25 mm

Single-row tapered roller bearing HR 30207 J NSK for combined radial and one-direction axial loads. Its precise separable construction provides high rigidity and permits adjustment of bearing clearance or preload.

8x16x5 mm

Miniature thin-section deep groove ball bearing 688 2Z RMB with metal shields on both sides. Its highly compact design provides low friction and protection for precise small mechanisms.

12.7x28.575x6.35 mm

Imperial single-row deep groove ball bearing KLNJ 1/2 C RHP. Its compact open design supports low friction together with radial and moderate axial loads.