Bearing - 234432 SP SKF

15x35x11 mm

6202 2ZR ZKL single-row deep groove ball bearing with non-contact metal shields on both sides. Suitable for radial and moderate axial loads in both directions, combining low friction with protection of the lubricant from larger contaminants.

25x52x16.25 mm

30205 A KINEX single-row tapered roller bearing for high radial loads combined with axial load in one direction. The separable design allows the inner ring assembly and outer ring to be mounted independently.

5x16x5 mm

625 ZZ ZKL single-row deep groove ball bearing with non-contact metal shields on both sides. Suitable for radial and moderate axial loads in both directions, combining low friction with protection of the lubricant from larger contaminants.

25x62x17 mm

Single-row 6305 2Z ZKL deep groove ball bearing with non-contact metal shields on both sides. It carries radial and limited axial loads in both directions; the shields retain lubricant while maintaining low friction.

25x33x20 mm

NK 25/20 INA needle roller bearing without an inner ring provides high radial load capacity within a very small cross-section. The needles run directly on a suitably hardened and ground 25 mm shaft raceway.

20x47x14 mm

6204 2RS BBC single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.

6x15x5 mm

696 2Z neu single-row deep groove ball bearing with non-contact metal shields on both sides. It combines low friction and lubricant retention with reliable radial and moderate axial load support in both directions.

8x22x7 mm

608 2RS TIMKEN single-row deep groove ball bearing with contact rubber seals on both sides. It carries radial and moderate axial loads in both directions while protecting the rolling elements from dust, contamination and lubricant loss.

15x42x13 mm

6302 2RS SKF single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.

30x62x16 mm

6206 2RS ZVL single-row deep groove ball bearing with contact rubber seals on both sides. It carries radial and moderate axial loads in both directions while protecting the rolling elements from dust, contamination and lubricant loss.

10x26x8 mm

6000 2RSH SKF single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.