Bearing - 29420 M ZKL

10x30x9 mm

6200 Z ZKL single-row deep groove ball bearing with a non-contact metal shield on one side. Suitable for radial and moderate axial loads in both directions when one side of the bearing needs protection from coarse contamination.

25x47x12 mm

6005 2RS C3 SKF single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss. C3 provides greater radial internal clearance than the normal class.

30x72x19 mm

Single-row 6306 Z ZKL deep groove ball bearing with a non-contact metal shield on one side. It carries radial and limited axial loads in both directions; the opposite side remains open.

20x42x12 mm

6004 ZKL single-row deep groove ball bearing in open design. A compact bearing for radial and moderate axial loads in both directions, intended for arrangements providing their own lubrication and protection.

35x62x14 mm

6007 2Z ZVL single-row deep groove ball bearing with non-contact metal shields on both sides. Suitable for radial and moderate axial loads in both directions, combining low friction with protection of the lubricant from larger contaminants.

25x52x16.25 mm

30205 A KINEX single-row tapered roller bearing for high radial loads combined with axial load in one direction. The separable design allows the inner ring assembly and outer ring to be mounted independently.

10x26x8 mm

Single-row 6000 ZR ZKL deep groove ball bearing with a non-contact metal shield on one side. It carries radial and limited axial loads in both directions; the open side provides access to the rolling contact.

9x24x7 mm

609 Z ZKL single-row deep groove ball bearing with a non-contact metal shield on one side. Suitable for radial and moderate axial loads in both directions when one side of the bearing needs protection from coarse contamination.

45x85x19 mm

Single-row 6209 2RS ZKL deep groove ball bearing with contact rubber seals on both sides. It carries radial and limited axial loads in both directions; the seals retain lubricant and protect the rolling contact from contaminants.

Double-direction ZKL 52209 thrust ball bearing for axial loads in both directions.

Overall dimensions 35 × 73 × 37 mm. The separable two-row assembly is intended exclusively for axial forces and cannot carry radial loads.

10x26x8 mm

6000 2RSH SKF single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.