Bearing - 30304 A ZKL

40x65x22 mm

NA 40 V ZKL is a full-complement needle roller bearing with an inner ring, dimensionally corresponding to type NKIS40. The V design uses a full complement of needles without a cage, providing high radial load capacity in a compact cross-section.

It is intended primarily for high radial loads at low to moderate speeds. The separate inner ring also permits use where the shaft cannot be prepared as a precision raceway.

17x35x10 mm

6003 2RSH SKF single-row deep-groove ball bearing with high-performance contact seals on both sides for reliable protection of the lubricant and bearing interior.

15x32x9 mm

6002 2RS TIMKEN is a single-row deep-groove ball bearing with contact seals on both sides. The seals help retain lubricant and protect the rolling space from dust, moisture and other common contaminants.

Its versatile design supports radial load and moderate axial loads in both directions. It is well suited to applications where dependable bearing protection and low maintenance requirements are important.

4x11x4 mm

694 2Z P5 ZKL is a miniature single-row deep-groove ball bearing with two non-contact metal shields and the higher P5 accuracy class. It supports radial load and moderate axial loads in both directions with low friction.

The shields help retain lubricant and limit the entry of larger contaminants. Its compact dimensions and P5 accuracy suit precise small rotating mechanisms.

75x115x20 mm

Single-row cylindrical roller bearing NU 1015 M DKF for high radial loads, rigid guidance and non-locating shaft arrangements. The separable NU design permits axial displacement in both directions.

8x12x10 mm

HK 0810 SKF is a drawn-cup needle roller bearing with open ends. Its compact cross-section provides high radial load carrying capacity and stiffness; it is not intended to support axial load.

The bearing has no separate inner ring, so a suitably hardened and ground shaft surface normally forms the raceway. Correct shaft quality, housing fit and lubrication are essential for service life.

25x62x17 mm

6305 2ZR FAG is a single-row deep-groove ball bearing with two non-contact metal shields. Its versatile design supports radial load and moderate axial loads in both directions, while low friction makes it suitable for higher speeds.

The shields help retain lubricant and limit the entry of larger contaminants. This is a general-purpose machine bearing, not a contact-sealed or watertight design.

25x62x17 mm

6305 2RSR FAG is a single-row deep-groove ball bearing with contact seals on both sides. The seals help retain lubricant and protect the rolling space from dust, moisture and other common contaminants.

Its versatile design supports radial load and moderate axial loads in both directions. It is well suited to applications where dependable bearing protection and low maintenance requirements are important.