Bearing - 309726 DA (VKBA 3786) (20012) SKF

INA KSO20-PP is an open self-aligning linear ball bearing designed for precise and smooth linear motion on a supported guide shaft with a diameter of 20 mm. The PP version is fitted with lip seals on both sides to help protect the internal components against contamination and retain lubricant.

INA bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.

35x80x21 mm

6307 2RSR KINEX single-row deep groove ball bearing with contact rubber seals on both sides. A dependable choice for radial and bidirectional axial loads where retaining lubricant and protecting the bearing interior from contamination are important.

ZKL 1309 – self-aligning ball bearing, cylindrical bore; d=45 mm; D=100 mm; B=25 mm; Cr=39.1 kN; C0r=12.8 kN; Pu=0.58 kN; ngrease=6 300 min−1; noil=7 500 min−1

17x47x15.25 mm

30303 MGK tapered roller bearing is a single-row, separable bearing for combined radial and axial loads. Its tapered raceways carry axial load in one direction; bearings are normally paired where axial load must be supported in both directions.

40 × 47 × 12 mm
INA HK 4012 B needle roller bearing for replacement use. Dimensions d × D × B: 40 × 47 × 12 mm.
Before ordering, compare the complete designation HK 4012 B INA, dimensions and design with the original part.

80x125x22 mm
Rubber seals on both sides
Deep-groove ball bearing 6016 2RSR FAG for machinery applications.