Bearing - 32016 AX ZKL

28x58x16 mm

Single-row deep-groove ball bearing 62/28 FBJ JAPAN with a special 28 mm bore for radial and axial loads in both directions. The open design allows lubrication to be selected for the application; when replacing, compare the complete designation, dimensions and required clearance.

50x80x20 mm

Single-row tapered roller bearing 32010 X FAG with a separable design for high combined radial and one-direction axial loads. Compare the exact X variant with the original part; this product designation does not include XL.

38.1x72.238x20.638 mm

Timken tapered roller bearing set 16150/16284 comprising cone 16150 and cup 16284. Imperial TS design for high radial loads and axial load in one direction; separable components simplify mounting and adjustment.

25x52x18 mm

2205 E 2RS1TN9 SKF double-row self-aligning ball bearing with a cylindrical bore accommodates slight misalignment and shaft deflection. Contact seals on both sides (2RS1) protect the internal components and help retain lubricant.

30x72x19 mm

1306 MGM double-row self-aligning ball bearing with a cylindrical bore aligns itself against the spherical raceway of the outer ring. It is suitable for arrangements where slight shaft-to-housing misalignment or shaft deflection may occur.

40x90x34 mm

Double-row angular contact ball bearing 3308 D DKF for combined radial and axial loads in both directions. Its rigid, non-separable design provides accurate shaft guidance and can also accommodate tilting moments.

10x26x8 mm

6000 2RSH C3 SKF deep groove ball bearing has contact rubber seals on both sides and greater-than-normal C3 radial internal clearance. The seals protect lubricant and raceways, while C3 provides allowance for clearance reduction caused by fits or operating temperature.

30x62x16 mm

NUP 206 E ZVL single-row cylindrical roller bearing carries high radial loads and locates the shaft axially in both directions through its flange arrangement. The E suffix denotes an optimized internal design with increased load capacity.

20x52x22 mm
Greater radial internal clearance

Double-row angular-contact ball bearing 3304 C3 ZKL for rigid arrangements under combined loads. It carries radial load and axial loads in both directions; C3 clearance provides extra allowance where thermal expansion or tight fits reduce operating clearance.