Bearing - 51208 P5 ZKL

555062 FAG special barrel roller bearing is an open single-row roller bearing with barrel-shaped rolling elements. Its robust construction is intended primarily for high radial loads; this special catalogue number must be matched completely to the original bearing arrangement.

20x52x15 mm

6304 Z ZKL deep-groove ball bearing is a single-row radial bearing with a non-contact metal shield on one side. It supports radial loads and moderate axial forces in both directions. The Z shield protects one side of the rolling contact while the open side permits lubricant access or machine-integrated sealing.

2302 2RS CODEX self-aligning ball bearing has two rows of balls and a spherical raceway in the outer ring, allowing it to compensate for angular misalignment between the shaft and housing. Rubber seals on both sides protect the factory grease and the bearing interior against common contaminants.

90x140x37 mm

The NN 3018 KMNA P51 ZKL double-row cylindrical roller bearing is a precision radial bearing with high rigidity and load capacity, intended particularly for machine-tool spindles and other demanding positions. Its tapered bore permits accurate radial-clearance adjustment during mounting.

The KMNA P51 configuration is part of the exact ZKL specification and must not be replaced by a standard NN 3018 without verifying every suffix.

30x72x19 mm

6306 2RS ZVL deep-groove ball bearing is a single-row radial bearing with rubber seals on both sides. It carries radial loads and moderate axial forces in either direction. The 2RS design helps protect the internal rolling contact from dust and moisture while retaining lubricant inside the bearing.

6304-C-2HRS-C3 FAG deep-groove ball bearing is a Generation C single-row bearing with HRS contact seals on both sides and C3 radial internal clearance. It combines reliable grease protection with low friction and carries radial loads and moderate axial loads in both directions.

100x215x73 mm

The 22320 E SKF spherical roller bearing is a double-row self-aligning bearing for very high radial loads and simultaneous axial loads in both directions. Its spherical outer-ring raceway helps accommodate misalignment between the shaft and housing.

This robust open bearing has a cylindrical bore and is intended for demanding industrial applications with suitable lubrication.

50x90x51.6 mm

UC 210 URB insert ball bearing is a sealed housing bearing with a spherical outside surface and extended inner ring. It is secured to a 50 mm shaft by two set screws. The design accommodates minor initial mounting misalignment inside a compatible housing.

32208 FBJ tapered roller bearing is a separable single-row bearing for high radial loads combined with axial load in one direction. Two bearings in an opposed arrangement are normally used when axial location is required in both directions.

15x42x17 mm

2302 2RS ZVL self-aligning ball bearing is a double-row bearing with a spherical outer-ring raceway and rubber seals on both sides. It accommodates moderate shaft-to-housing misalignment while carrying radial loads and light axial forces in either direction.