Bearing - 52312 ZKL
Related products
17x40x17 mm
The 3203 2RS neu double-row angular contact ball bearing supports radial loads, axial forces in both directions and tilting moments. Contact rubber seals on both sides help retain grease and protect the raceways from common contaminants.
A compact solution for gearboxes, pumps, hubs, agricultural machinery and other positions requiring increased axial rigidity.
25x42x9 mm
The 61905 2RS KINEX thin-section deep-groove ball bearing is a compact single-row bearing with contact rubber seals on both sides. It combines a small radial cross-section and low weight with the ability to support radial loads and moderate axial forces in both directions.
Suitable for small electric motors, instruments, gearboxes, robotics and other mechanisms with restricted radial space.
17x35x10 mm
6003 2RS FAG deep-groove ball bearing is a single-row radial bearing with rubber seals on both sides. It carries radial loads and moderate axial forces in either direction. The 2RS design helps protect the internal rolling contact from dust and moisture while retaining lubricant inside the bearing.
55x63x25 mm
The HK 5525 ZEN drawn-cup needle roller bearing is a thin-walled, open-ended bearing without an inner ring. It provides high radial load capacity where radial installation space is very limited.
The shaft acts directly as the inner raceway and therefore requires suitable hardness, accuracy and surface finish. This bearing does not provide axial location.
45x100x39.7 mm
3309 ZKL double-row angular-contact ball bearing carries high radial loads together with axial forces in both directions. Two ball rows provide rigid axial location and the ability to support tilting moments in a compact unit. It suits positions where a single-row ball bearing does not provide sufficient axial capacity.
45x100x25 mm
6309 2RS1 SKF deep-groove ball bearing is a single-row radial bearing with contact seals on both sides. It carries radial loads and moderate axial forces in either direction. The 2RS1 design protects the internal rolling contact from contaminants and helps retain lubricant inside the bearing.
Rubber seals on both sides
50x110x27 mm
The 6310 C 2HRS C3 FAG deep-groove ball bearing is a Generation C single-row bearing with contact seals on both sides and C3 radial internal clearance. It is grease-filled and normally requires no relubrication under suitable operating conditions.
Suitable for motors, pumps, fans, gearboxes and industrial drives requiring contamination protection and additional internal clearance for temperature or tight fits.
45x100x39 mm
3309 BD XL 2HRS TVH FAG double-row angular contact ball bearing in X-life performance design, sealed on both sides and fitted with a plastic cage.
32207 A ZKL tapered roller bearing is a separable single-row bearing for high radial loads combined with axial load in one direction. The A design offers increased load capacity and a higher limiting speed; clearance or preload is established during installation.
EZO 6805 2RS extra-thin single-row deep-groove ball bearing with contact rubber seals on both sides. Official manufacturer data: 25 × 37 × 7 mm, 4.3 kN dynamic load rating, 2.94 kN static load rating and 10,000 rpm limiting speed. MPN 6805 2RS.
25x47x12 mm
6005 2RS SKF deep-groove ball bearing is a single-row radial bearing with rubber seals on both sides. It carries radial loads and moderate axial forces in either direction. The 2RS design helps protect the internal rolling contact from dust and moisture while retaining lubricant inside the bearing.
Product detailed description
No product's description available
90x160x32,5 mm
30218 A ZKL single-row tapered roller bearing for high combined radial and one-direction axial loads.
6x19x6 mm
626 2RSR ZWICKER miniature ball bearing is a single-row radial bearing for a 6 mm shaft with rubber seals on both sides. It carries radial load and lighter axial forces in either direction. The 2RSR design protects the lubricant and rolling contact in small drives and precision mechanisms.
35x72x17 mm
NJ 207 ZKL cylindrical roller bearing is a single-row radial bearing with high load capacity and rigidity. The NJ design has two guiding flanges on the outer ring and one on the inner ring, allowing it to carry radial load, locate the shaft axially in one direction and permit axial displacement in the opposite direction.
25x42x20 mm
The GE 25 E 2RS ZVL radial spherical plain bearing has spherical sliding surfaces and rubber seals on both sides. It accommodates oscillating movement and misalignment while supporting high radial and combined loads.
Suitable for hydraulic cylinders, linkages, articulated mechanisms, agricultural and construction machinery. Its steel sliding surfaces require appropriate lubrication.
15x42x17 mm
2302 2RS ZVL self-aligning ball bearing is a double-row bearing with a spherical outer-ring raceway and rubber seals on both sides. It accommodates moderate shaft-to-housing misalignment while carrying radial loads and light axial forces in either direction.
20x52x15 mm
6304 Z ZKL deep-groove ball bearing is a single-row radial bearing with a non-contact metal shield on one side. It supports radial loads and moderate axial forces in both directions. The Z shield protects one side of the rolling contact while the open side permits lubricant access or machine-integrated sealing.
17x35x10 mm
6003 2Z ZKL single-row deep-groove ball bearing with metal shields on both sides for lubricant protection and low friction.
6x13x5 mm
686 2Z (618/6) CX miniature deep-groove ball bearing with non-contact metal shields on both sides for low friction and lubricant protection.
40x80x18 mm
6208 2Z INA deep-groove ball bearing is a single-row radial bearing with non-contact metal shields on both sides. It supports radial loading and moderate axial forces in either direction. The 2Z shields help retain lubricant and keep out coarse contaminants while maintaining low friction and suitability for higher speeds.
Rubber seals on both sides
17x47x15.25 mm
30303 MGK tapered roller bearing is a single-row, separable bearing for combined radial and axial loads. Its tapered raceways carry axial load in one direction; bearings are normally paired where axial load must be supported in both directions.
120x215x43.5 mm
30224 A URB tapered roller bearing is a robust single-row bearing for high radial loads combined with axial load in one direction. Its separable design allows the inner ring with rollers and the outer ring to be mounted independently. For a correct replacement, compare the complete designation including suffix A, the dimensions and required clearance with the original part.
35x80x32.75 mm
32307 A KINEX tapered roller bearing is a robust single-row bearing for high radial loads combined with axial load in one direction. Its separable design allows the inner ring with rollers and the outer ring to be mounted independently. For a correct replacement, compare the complete designation including suffix A, the dimensions and required clearance with the original part.
30x62x16 mm
6206 2ZR ZVL single-row deep-groove ball bearing with metal shields on both sides for lubricant protection and low friction.
Rubber seals on both sides
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any ZKL product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
ZKL – product identification and supply
The ZKL designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.
| Manufacturing company : | ZKL, a.s. |
|---|---|
| Address : | Jedovnická 2346/8, 628 00 Brno, Czech Republic |
| E-mail : | head@zkl.cz |