Bearing - 53309 U STEYR

Single-row tapered roller bearing TIMKEN 07093/07205. d = 23.813 mm; D = 51.999 mm; T = 15.011 mm.

Single-row tapered roller bearing TIMKEN 05062/05175. d = 15.875 mm; D = 44.45 mm; T = 15.494 mm.

Precision bearings NSK 100BER10HTE34DSUELP3. Dimensions of this variant: unconfirmed.

Bearing - 6307 ZKL

35 × 80 × 21 mm. single-row deep groove ball bearing in an open design. Deep raceways carry radial and moderate axial loads in both directions with low friction.

Precision bearings NSK 100BER10ETYNDBBELP4Y. Dimensions of this variant: unconfirmed.

Bearing - 6209 2RS ZKL

45 × 85 × 19 mm. Single-row deep groove ball bearing with contact rubber seals on both sides. It carries radial and limited axial loads in both directions; the seals retain lubricant and protect the rolling contact from contaminants.

Double outer ring for a tapered roller bearing TIMKEN 02823D. D = 76.2 mm; C = 38.1 mm. Separate tapered roller bearing component; not a complete bearing.

Bearing - RNU 228 M (168 × 250 × 42 mm) NEU

168 × 250 × 42 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - 6002 2RS FAG

15 × 32 × 9 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.

Double outer ring for a tapered roller bearing TIMKEN 05180D. D = 45.984 mm; C = 25.212 mm. Separate tapered roller bearing component; not a complete bearing.

Tapered roller bearing outer ring TIMKEN 07205X. D = 51.986 mm; C = 13 mm. Separate tapered roller bearing component; not a complete bearing.

Double outer ring for a tapered roller bearing TIMKEN 07196D. D = 50.005 mm; C = 25.4 mm. Separate tapered roller bearing component; not a complete bearing.