Bearing - 6003 2RSH C3 SKF
Product detailed description
6003-2RSH/C3 SKF is a single-row deep groove ball bearing suitable for radial loads and axial loads in both directions. Integral seals retain the lubricant inside the bearing and protect the rolling components against contaminants and moisture.
Designation
- 6003: single-row deep groove ball bearing
- 2RSH: NBR synthetic-rubber contact seals on both sides
- C3: greater radial internal clearance than the Normal class
- Performance class: SKF Explorer
SKF technical data
- Dimensions d × D × B: 17 × 35 × 10 mm
- Basic dynamic load rating Cr: 6.37 kN
- Basic static load rating C0r: 3.25 kN
- Reference speed: 45,000 min⁻¹
- Limiting speed: 13,000 min⁻¹
- Cage: pressed steel
- Lubrication: grease filled, without relubrication feature
Application and mounting
The bearing is suitable for electric motors, fans, pumps, gearboxes and other compact rotating mechanisms. C3 clearance is intended for arrangements where tight fits, temperature or speed reduce operating clearance; do not substitute it for Normal clearance without checking the machine requirement. During mounting, apply force only through the ring being interference fitted and avoid damaging the seals. Before ordering, verify the full 6003-2RSH/C3 designation and 17 × 35 × 10 mm dimensions.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any SKF product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
SKF – product identification and supply
The SKF designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.
| Manufacturing company : | AB SKF (publ) |
|---|---|
| Address : | Sven Wingquists Gata 2, SE-415 50 Göteborg, Sweden |
| E-mail : | skf.cz@skf.com |