Bearing - 6003 2Z C3LHT23 SKF

Deep groove ball bearing SS 6001 2RS CRB is a compact single-row 6001-series bearing with rubber seals on both sides. It is suitable for shaft arrangements carrying radial and moderate axial loads.

The double-sealed design helps protect the bearing interior from common contaminants. Before ordering, compare the complete designation, dimensions and operating requirements; the SS prefix is part of this specific variant designation.

51105 ZKL single-direction thrust ball bearing is a separable bearing for axial load in one direction. It consists of a shaft washer, housing washer and ball-and-cage assembly and is not designed to carry radial load.

6304-C-2HRS-C3 FAG deep-groove ball bearing is a Generation C single-row bearing with HRS contact seals on both sides and C3 radial internal clearance. It combines reliable grease protection with low friction and carries radial loads and moderate axial loads in both directions.

6014 2RSR FAG deep-groove ball bearing is a single-row bearing with RSR contact seals on both sides. It carries radial loads and moderate axial loads in both directions while protecting the factory grease against leakage, dust and moisture.

61904 2RS EZO deep-groove ball bearing is a single-row bearing with contact rubber seals on both sides. It carries radial loads and moderate axial loads in both directions, while the factory grease is protected against leakage and common contaminants.

25x52x15 mm

S 6205 2RS MTM deep-groove ball bearing is a single-row radial bearing with rubber seals on both sides. It carries radial loads and moderate axial forces in either direction. The S prefix forms part of the complete product designation.

6214 2RS NACHI deep-groove ball bearing is a single-row bearing with rubber seals on both sides. It carries radial loads and moderate axial loads in both directions while protecting the factory grease against leakage and common contaminants.

62209 2RS KINEX deep-groove ball bearing is a single-row bearing with rubber seals on both sides. It carries radial loads and moderate axial loads in both directions while protecting the factory grease against leakage and common contaminants.

15x42x17 mm

2302 2RS ZVL self-aligning ball bearing is a double-row bearing with a spherical outer-ring raceway and rubber seals on both sides. It accommodates moderate shaft-to-housing misalignment while carrying radial loads and light axial forces in either direction.

17x40x17 mm

The 3203 2RS neu double-row angular contact ball bearing supports radial loads, axial forces in both directions and tilting moments. Contact rubber seals on both sides help retain grease and protect the raceways from common contaminants.

A compact solution for gearboxes, pumps, hubs, agricultural machinery and other positions requiring increased axial rigidity.