Bearing - 6019 SKF

55x63x25 mm

The HK 5525 ZEN drawn-cup needle roller bearing is a thin-walled, open-ended bearing without an inner ring. It provides high radial load capacity where radial installation space is very limited.

The shaft acts directly as the inner raceway and therefore requires suitable hardness, accuracy and surface finish. This bearing does not provide axial location.

555062 FAG special barrel roller bearing is an open single-row roller bearing with barrel-shaped rolling elements. Its robust construction is intended primarily for high radial loads; this special catalogue number must be matched completely to the original bearing arrangement.

17x40x17 mm

The 3203 2RS neu double-row angular contact ball bearing supports radial loads, axial forces in both directions and tilting moments. Contact rubber seals on both sides help retain grease and protect the raceways from common contaminants.

A compact solution for gearboxes, pumps, hubs, agricultural machinery and other positions requiring increased axial rigidity.

17x47x15.25 mm

30303 MGK tapered roller bearing is a single-row, separable bearing for combined radial and axial loads. Its tapered raceways carry axial load in one direction; bearings are normally paired where axial load must be supported in both directions.

2302 2RS CODEX self-aligning ball bearing has two rows of balls and a spherical raceway in the outer ring, allowing it to compensate for angular misalignment between the shaft and housing. Rubber seals on both sides protect the factory grease and the bearing interior against common contaminants.

25x52x15 mm
FAG 7205-B-XL-2RS-TVP single-row angular-contact ball bearing in X-life design, with rubber seals on both sides and a polyamide cage.

40x80x18 mm

The 6208 2RS TIMKEN deep-groove ball bearing is a single-row radial bearing with contact rubber seals on both sides. The seals help retain grease and protect the raceways from common dust and moisture.

A versatile choice for electric motors, pumps, fans, gearboxes, conveyors and agricultural machinery. It supports radial loads and moderate axial forces in both directions.

SS 61800 2Z neu stainless deep-groove ball bearing is a thin-section single-row bearing with non-contact metal shields on both sides. It combines low friction and protection of the factory lubricant against common dust, while the stainless design offers better corrosion resistance than conventional bearing steel.

6304-C-2HRS-C3 FAG deep-groove ball bearing is a Generation C single-row bearing with HRS contact seals on both sides and C3 radial internal clearance. It combines reliable grease protection with low friction and carries radial loads and moderate axial loads in both directions.

35x72x42.9 mm

The UC 207 DKF insert bearing is a sealed ball-bearing insert with a spherical outside surface and an extended inner ring. It is secured to the shaft by two grub screws and is designed for installation in a matching bearing housing.

Suitable for conveyors, fans, agricultural machinery and simple industrial drives. This product is the UC insert only; a complete housing is not included.

1210 K ZKL self-aligning ball bearing has two rows of balls, a spherical outer-ring raceway and a tapered bore. It accommodates angular misalignment between shaft and housing and can be mounted directly on a tapered journal or with a matching adapter sleeve.