Bearing - 6022 2Z C3 FAG

Product detailed description

6022 2Z C3 FAG is a single-row deep-groove ball bearing with dimensions of 110 × 170 × 28 mm. The 2Z execution has non-contact steel shields on both sides, while C3 denotes radial internal clearance greater than Normal.

Key features

• Design: non-separable single-row bearing for radial loads and moderate axial loads in both directions.
• 2Z shields: steel shields on both sides help retain lubricant and protect against coarser contaminants with low friction.
• C3 clearance: increased radial internal clearance provides allowance for temperature differences, higher speeds or tighter fits; it is not automatically suitable for every application.
• Dimensions: 110 mm bore, 170 mm outside diameter and 28 mm width.

Installation and use

During mounting, apply fitting force only through the ring with the interference fit and never through the balls. Do not damage the shields or wash the bearing, so the factory lubricant remains intact. Before ordering, verify the full designation 6022 2Z C3 FAG, particularly the C3 clearance requirement, speed, temperature and contamination conditions.