Bearing - 6028 MA C4 FAG USA

Bearing - 33020 CRAFT

100 × 150 × 39 mm. CRAFT bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.

Bearing - LBA30 OP SKF

SKF bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.

Bearing - EE128112/128160 TIMKEN

280 × 406.4 × 67.67 mm. Timken single-row tapered roller bearing in an open design for combined radial and axial loads.

Bearing - 6317 M/C3VL0241 SKF

single-row deep groove ball bearing with an electrically insulated INSOCOAT outer ring.

Bearing - 22218 EW33J ZKL

90 × 160 × 40 mm. double-row spherical roller bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against ZKL documentation and the requirements of the specific application.

Bearing - 3206 BD XL 2HRS TVH FAG

FAG 3206-BD-XL-2HRS-TVH – double-row angular contact ball bearing, seals on both sides; d=30 mm; D=62 mm; B=23.8 mm; m≈0.29 kg; 2HRS; TVH; PA66.

Bearing - B7014 AATBP4 ZKL

70 × 110 × 20 mm. ZKL bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.

Linear ball bearing - KSO20-PP INA

is an open self-aligning linear ball bearing designed for precise and smooth linear motion on a supported guide shaft with a diameter of 20 mm. The PP version is fitted with lip seals on both sides to help protect the internal components against contamination and retain lubricant. INA bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design….

Bearing - 22222-E1-K FAG

22222 E1 K FAG FAG bearing 22222 E1 K. Before ordering, compare the full designation and execution with the part used in your equipment.

Bearing - 3205 BD XL 2Z TVH FAG

FAG 3205-BD-XL-2Z-TVH – double-row angular contact ball bearing, shields on both sides; d=25 mm; D=52 mm; B=20.6 mm; m≈0.153 kg; 2Z; TVH; PA66.

Bearing - 6011 FAG

55 × 90 × 18 mm. Single-row deep-groove ball bearing for size 55 × 90 × 18 mm. Bore diameter d = 55 mm, outside diameter D = 90 mm, width B = 18 mm.

Bearing - 801207 A FAG

FAG bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.