Bearing - 607 2RSH SKF

80x140x26 mm

Precision single-row angular contact ball bearing 7216 ACTB P5 ZKL for combined radial and one-direction axial loads. Accuracy class P5 supports smooth, precise running in demanding bearing arrangements.

30x55x17 mm

32006 JR DPI is a single-row tapered roller bearing for arrangements exposed to radial load together with axial load in one direction. Its separable design allows the inner ring assembly with cage and rollers to be mounted independently of the outer ring.

It is suitable for gearboxes, hubs, shafts and other precise industrial arrangements. Tapered roller bearings are normally used in opposed pairs when axial forces must be supported in both directions.

25x52x15 mm
FAG 7205-B-XL-2RS-TVP single-row angular-contact ball bearing in X-life design, with rubber seals on both sides and a polyamide cage.

75x110x12 mm
Open STEYR 16115 single-row deep-groove ball bearing with a slim cross-section. The unshielded and unsealed design provides direct access for lubrication but requires a clean and suitably lubricated installation.

35x80x21 mm

6307 2RS SKF is a single-row deep-groove ball bearing with contact rubber seals on both sides. It supports radial and limited axial loads while protecting the lubricant and raceways in commonly contaminated operation.

10x26x8 mm
KINEX 6000 2RS single-row deep-groove ball bearing with contact rubber seals on both sides. The closed design helps retain lubricant and protects the raceways from contamination and moisture.

8x22x7 mm

608 ZC4 ZKL is a single-row deep-groove ball bearing with one Z metal shield and very large C4 radial internal clearance. Its compact design supports radial and limited axial loads in both directions.