Bearing - 61818 SKF

50x110x27 mm

The 6310 C 2HRS C3 FAG deep-groove ball bearing is a Generation C single-row bearing with contact seals on both sides and C3 radial internal clearance. It is grease-filled and normally requires no relubrication under suitable operating conditions.

Suitable for motors, pumps, fans, gearboxes and industrial drives requiring contamination protection and additional internal clearance for temperature or tight fits.

Four-point contact ball bearing Q 305 P63 DKF is a single-row angular contact bearing for axial loads in both directions. It provides bidirectional axial shaft location within a compact cross-section.

The P63 suffix combines P6 accuracy and C3 axial internal clearance. This version must match the application requirements and is not an automatic substitute for Normal accuracy or clearance.

90x140x37 mm

The NN 3018 KMNA P51 ZKL double-row cylindrical roller bearing is a precision radial bearing with high rigidity and load capacity, intended particularly for machine-tool spindles and other demanding positions. Its tapered bore permits accurate radial-clearance adjustment during mounting.

The KMNA P51 configuration is part of the exact ZKL specification and must not be replaced by a standard NN 3018 without verifying every suffix.

YAR 207 2F SKF insert bearing has an inner ring extended on both sides and locks onto the shaft with two set screws. A spherical outside surface, contact seals with flingers on both sides and relubrication capability support easy installation and reliable operation.

6214 2RS NACHI deep-groove ball bearing is a single-row bearing with rubber seals on both sides. It carries radial loads and moderate axial loads in both directions while protecting the factory grease against leakage and common contaminants.

SS 6203 2RS neu stainless-steel deep-groove ball bearing is a single-row bearing with rubber seals on both sides. The stainless execution improves resistance to moisture and corrosion, while the seals protect the factory grease and bearing interior.

100x215x73 mm

The 22320 E SKF spherical roller bearing is a double-row self-aligning bearing for very high radial loads and simultaneous axial loads in both directions. Its spherical outer-ring raceway helps accommodate misalignment between the shaft and housing.

This robust open bearing has a cylindrical bore and is intended for demanding industrial applications with suitable lubrication.

25x52x15 mm

S 6205 2RS MTM deep-groove ball bearing is a single-row radial bearing with rubber seals on both sides. It carries radial loads and moderate axial forces in either direction. The S prefix forms part of the complete product designation.

Deep groove ball bearing 61803 2RS IBB in a slim design with rubber seals on both sides. Suitable for compact arrangements where protection against dust and contamination is important.

30x72x19 mm

6306 2RS ZVL deep-groove ball bearing is a single-row radial bearing with rubber seals on both sides. It carries radial loads and moderate axial forces in either direction. The 2RS design helps protect the internal rolling contact from dust and moisture while retaining lubricant inside the bearing.

555062 FAG special barrel roller bearing is an open single-row roller bearing with barrel-shaped rolling elements. Its robust construction is intended primarily for high radial loads; this special catalogue number must be matched completely to the original bearing arrangement.