Bearing - 61904 2RS EZO
Product detailed description
61904 2RS EZO is a single-row deep-groove ball bearing with dimensions of 20 × 37 × 9 mm. The 2RS design has contact rubber seals on both sides, running against the smooth shoulder of the inner ring to help retain lubricant inside the bearing.
Key features
- Design: non-separable single-row bearing for radial loads and moderate axial loads in both directions.
- 2RS seals: contact seals on both sides restrict the entry of dust and moisture as well as lubricant leakage.
- Lubrication: the sealed bearing is factory-filled with grease and is normally not relubricated in standard service.
- Dimensions: 20 mm bore, 37 mm outside diameter and 9 mm width.
Installation and use
During mounting, apply the fitting force only through the ring with the interference fit; never transmit force through the balls. Do not damage the seals or wash the bearing, as this would impair protection and remove the factory lubricant. Before ordering, compare the full designation 61904 2RS EZO, dimensions, clearance and operating conditions with the original component or technical documentation.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any EZO product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
EZO – product identification and supply
The EZO designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.