Bearing - 6201 FAG

30x62x20 mm

Rubber seals on both sides

The 62206 2RS1 SKF deep-groove ball bearing is a single-row bearing with contact seals on both sides. Its 30 × 62 × 20 mm dimensions, factory grease fill and effective lubricant retention make it suitable for compact, protected bearing arrangements.

6304-C-2HRS-C3 FAG deep-groove ball bearing is a Generation C single-row bearing with HRS contact seals on both sides and C3 radial internal clearance. It combines reliable grease protection with low friction and carries radial loads and moderate axial loads in both directions.

The UC 205 CRAFT insert bearing is a sealed ball-bearing insert with a spherical outside surface and an extended inner ring. It is secured to the shaft by two grub screws and is designed for installation in a matching bearing housing.

Suitable for conveyors, fans, agricultural machinery and simple industrial drives. This product is the UC insert only; a complete housing is not included.

15x28x9 mm

Single-direction thrust ball bearing 51102 URB for carrying axial load in one direction. Its separable design simplifies installation of the individual washers and ball-and-cage assembly; when replacing, compare the complete designation, dimensions and load direction.

25x52x15 mm

High-precision spindle ball bearing S 6205 C 18 TA UP GMN for precision arrangements carrying combined radial load and axial load in one direction. The complete C 18 TA UP design, pairing and required preload must be preserved when replacing it.

S 6001 2RS neu deep-groove ball bearing is a single-row bearing with contact rubber seals on both sides. It carries radial loads and moderate axial loads in both directions, while the factory grease is protected against leakage and common contaminants.

Deep groove ball bearing 6205 2Z ZVL is a single-row bearing with non-contact metal shields on both sides. It accommodates radial loads and moderate axial loads in both directions.

The 2Z design helps retain lubricant and limits the ingress of common contaminants while maintaining low friction. The shields are not watertight and are not intended for direct exposure to liquids.

Four-point contact ball bearing Q 305 P63 DKF is a single-row angular contact bearing for axial loads in both directions. It provides bidirectional axial shaft location within a compact cross-section.

The P63 suffix combines P6 accuracy and C3 axial internal clearance. This version must match the application requirements and is not an automatic substitute for Normal accuracy or clearance.

Deep groove ball bearing 6012 SKF is a single-row bearing in an open design. It accommodates radial loads and moderate axial loads in both directions and is suitable for accurate shaft support.

The open construction has no integral shields or seals, allowing direct lubricant access but requiring a clean or externally protected environment and a correctly designed lubrication system.