Bearing - 6203 2RS NSK

25x47x15 mm
ZVL 32005 AX single-row tapered roller bearing for combined radial and one-direction axial loads; the separable design requires correct clearance or preload adjustment.

65x100x18 mm
ZVL 6013 2RS single-row deep-groove ball bearing with rubber seals on both sides for improved protection of the lubricant and raceways in normally dusty or damp operation.

20x52x16.25 mm
DPI 30304 single-row tapered roller bearing for combined radial and axial loads. The separable cone with rollers and outer-ring cup simplify mounting and precise clearance or preload adjustment.

12x28x8 mm
URB 6001 single-row open deep groove ball bearing for radial and axial loads in both directions. Dynamic load rating 5.1 kN, mass 0.022 kg.

50x58x25 mm

Single-row INA HK5025 drawn cup needle roller bearing with open ends and cage, designed for high radial loads in a compact radial envelope. The unsealed version is suitable for grease or oil lubrication.

17x35x10 mm

Single-row ZKL 6003-RS deep groove ball bearing with a rubber seal on one side. The sealed side helps protect the lubricant, while the opposite side remains open for the lubrication method defined by the bearing arrangement.

40x80x18 mm
DPI 6208 single-row deep-groove ball bearing for reliable radial-load support together with limited axial loads in both directions.

20x52x15 mm
KINEX 6304 2RS single-row deep-groove ball bearing with contact rubber seals on both sides. The closed design helps retain lubricant and protects the raceways from contamination and moisture.

25x62x17 mm

Single-row SKF Explorer 6305-2Z/C3GJN deep groove ball bearing with non-contact sheet-steel shields on both sides and C3 radial internal clearance. The grease-lubricated design is suitable for high rotational speeds.

56x85x40 mm
neu GE 56 radial spherical plain bearing for oscillating and tilting motion at low sliding speeds. Its spherical sliding surfaces carry radial load and accommodate angular misalignment between the shaft and housing.

8x24x8 mm
ZKL 628 2Z single-row deep-groove ball bearing with non-contact metal shields on both sides for low friction and protection from ordinary contamination.