Bearing - 6205 2RS C3 FAG

60x110x28 mm

22212 ZKL double-row spherical roller bearing with a cylindrical bore carries high radial loads and axial loads in both directions. Its self-aligning design helps accommodate slight misalignment and shaft deflection.

60x110x22 mm

Double-row self-aligning ball bearing 1212 K ZKL with a 1:12 tapered bore. Accommodates moderate angular misalignment and shaft deflection; suitable primarily for radial load and limited axial load in both directions.

35x72x17 mm

Single-row cylindrical roller bearing N 207 ZKL for high radial loads and accurate shaft guidance. The N design permits axial displacement of the shaft relative to the housing in both directions; when replacing, compare the complete designation and required internal clearance.

40x80x18 mm

Single-row deep groove ball bearing 6208 N ZKL in open design, with a snap-ring groove in the outer ring. Suitable for radial and axial loads in both directions; the N suffix denotes the groove, not an included snap ring.

40x80x18 mm
Metal shields on both sides

Single-row deep-groove ball bearing 6208 2Z ROLLWAY for radial load and moderate axial loads in both directions. Non-contact metal shields retain grease with low friction and protect against ordinary dry contamination.

35x100x25 mm

Single-row cylindrical roller bearing NJ 407 ZKL for high radial loads with axial shaft location in one direction. The NJ design permits axial displacement in the opposite direction; when replacing, compare the complete designation and required internal clearance.

50x90x21.75 mm

Single-row tapered roller bearing 30210 A P6X ZVL for high radial loads and axial load in one direction. The P6X tolerance version is intended for arrangements with higher accuracy requirements; the complete A P6X designation must match when replacing the bearing.

38.1x72.238x20.638 mm

Timken tapered roller bearing set 16150/16284 comprising cone 16150 and cup 16284. Imperial TS design for high radial loads and axial load in one direction; separable components simplify mounting and adjustment.

45x85x23 mm

Double-row self-aligning ball bearing 2209 E2RS1TN9 SKF with contact seals on both sides and a polyamide cage. It accommodates slight misalignment and shaft deflection and carries radial loads together with light axial loads in both directions.

65x120x32.75 mm

Single-row tapered roller bearing 32213 ZKL for high radial loads and axial load in one direction. The separable outer ring simplifies installation; the correct clearance or preload is set in conjunction with an opposing bearing.