Bearing - 6205 2RS NEREZ

Tapered roller bearing assembly with flanged outer ring TIMKEN 07100-90043. Dimensions of this variant: unconfirmed.

Single-row tapered roller bearing TIMKEN 05062/05175. d = 15.875 mm; D = 44.45 mm; T = 15.494 mm.

Bearing - YAT 205 SKF

25 × 52 × 27.2 mm. insert ball bearing with a narrow inner ring extended on one side and locking by two set screws. Standard contact seals on both sides protect the grease and bearing interior.

Tapered roller bearing assembly with flanged outer ring TIMKEN 07100S/07196B. d = 25.4 mm; D = 50.005 mm.

Tapered roller bearing outer ring TIMKEN 08237. D = 58.788 mm; C = 10.716 mm. Separate tapered roller bearing component; not a complete bearing.

Precision bearings NSK 100BER10HTE34DSUELP3. Dimensions of this variant: unconfirmed.

Bearing - 6002 2RS FAG

15 × 32 × 9 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.

Tapered roller bearing assembly with flanged outer ring TIMKEN 02475/02420B. d = 31.75 mm; D = 68.263 mm.

Bearing - 6906 2RS EZO

30 × 47 × 9 mm. Thin-section, single-row deep groove ball bearing with contact rubber seals on both sides. The CN-clearance design with a steel cage combines compact dimensions with protection of the lubricant from ordinary contaminants.

Bearing - 608 2RSH SKF

8 × 22 × 7 mm. Single-row deep-groove ball bearing. Contact seals of synthetic rubber (NBR) on both sides; compare the 2RSH suffix.

Double-row tapered roller bearing assembly TIMKEN 05075-90020. d = 19.05 mm; T = 31.75 mm.

Single-row tapered roller bearing TIMKEN 07079/07205. d = 20 mm; D = 51.999 mm; T = 15.011 mm.