Bearing - 6208 2RS TIMKEN

30x72x20.75 mm
30306 E ZKL tapered roller bearing for combined radial and axial loads.

15.875x42.862x14.288 mm

NEU 11590/11520 single-row tapered roller bearing for combined radial and axial load in one direction. The separable cone-and-cup design simplifies mounting and precise adjustment of the bearing arrangement.

15x35x11 mm

ZKL 6202 2RS P66 single-row deep-groove ball bearing with rubber seals on both sides. A versatile design for radial and limited axial loads in both directions, protected against common contaminants. Also compare the additional P66 designation when selecting a replacement.

10x30x9 mm
6200 2Z MSC deep-groove ball bearing with metal shields on both sides.

45x75x16 mm
FAG single-row deep groove ball bearing with metal shields on both sides (2Z).

6x19x6 mm
626 2Z FK deep-groove ball bearing with metal shields on both sides.

7x22x7 mm
Rubber seals on both sides. Compact INA single-row deep groove ball bearing for protected rotating assemblies.

25x62x17 mm
ZKL 6305 single-row deep-groove ball bearing in an open design.
For radial loads and limited axial loads in either direction.

20x52x15 mm
SKF 6304 2RS C3 single-row deep-groove ball bearing with rubber seals on both sides.
C3 denotes greater-than-normal radial internal clearance; for radial and limited axial loads in either direction.

8x22x7 mm

INA 608 2Z C3 single-row deep-groove ball bearing with non-contact metal shields on both sides. A low-friction shielded design for radial and limited axial loads in both directions. The C3 suffix denotes greater-than-normal radial internal clearance.

17x47x12 mm
INA LR 203 NPPU single-row yoke type track roller with a thick-walled outer ring and lip seals on both sides.
For running on tracks and primarily radial loads; the older NPPU designation is cross-referenced as 2RSR.