Bearing - 6208 2Z C3 SKF

Needle roller bearing HK 2012 CX is a thin-walled bearing with a drawn outer cup, cage and needle rollers. Its open-ended design without an inner ring provides high radial load capacity within a very small radial space.

The raceway is normally formed by a hardened and ground shaft surface; when the shaft cannot meet the raceway requirements, a suitable separate inner ring must be used.

17x40x17 mm

The 3203 2RS neu double-row angular contact ball bearing supports radial loads, axial forces in both directions and tilting moments. Contact rubber seals on both sides help retain grease and protect the raceways from common contaminants.

A compact solution for gearboxes, pumps, hubs, agricultural machinery and other positions requiring increased axial rigidity.

555062 FAG special barrel roller bearing is an open single-row roller bearing with barrel-shaped rolling elements. Its robust construction is intended primarily for high radial loads; this special catalogue number must be matched completely to the original bearing arrangement.

Deep groove ball bearing 6006 2Z C3 ZVL is a single-row bearing with metal shields on both sides and C3 radial internal clearance. It accommodates radial loads and moderate axial loads in both directions.

The non-contact 2Z shields limit contaminant ingress while maintaining low friction. C3 clearance is greater than Normal and must suit the temperature, speed and fit; it is not an automatic substitute for standard clearance.

1210 K ZKL self-aligning ball bearing has two rows of balls, a spherical outer-ring raceway and a tapered bore. It accommodates angular misalignment between shaft and housing and can be mounted directly on a tapered journal or with a matching adapter sleeve.

EZO 6805 2RS extra-thin single-row deep-groove ball bearing with contact rubber seals on both sides. Official manufacturer data: 25 × 37 × 7 mm, 4.3 kN dynamic load rating, 2.94 kN static load rating and 10,000 rpm limiting speed. MPN 6805 2RS.

6310 2RS C3 ZKL deep-groove ball bearing is a single-row bearing with rubber seals on both sides and greater-than-normal C3 radial internal clearance. It carries radial loads and moderate axial loads in both directions while protecting the factory grease against leakage and common contaminants.

Self-aligning ball bearing 2306 E 2RS1TN9 SKF has two rows of balls and a common spherical raceway in the outer ring. This design accommodates static and dynamic misalignment between the shaft and housing.

Seals on both sides help protect the bearing interior from contaminants. It is suitable for arrangements where shaft deflection or mounting misalignment can occur.

62209 2RS KINEX deep-groove ball bearing is a single-row bearing with rubber seals on both sides. It carries radial loads and moderate axial loads in both directions while protecting the factory grease against leakage and common contaminants.

40x80x18 mm

The 6208 2RS TIMKEN deep-groove ball bearing is a single-row radial bearing with contact rubber seals on both sides. The seals help retain grease and protect the raceways from common dust and moisture.

A versatile choice for electric motors, pumps, fans, gearboxes, conveyors and agricultural machinery. It supports radial loads and moderate axial forces in both directions.