Bearing - 6210 2Z P6 ZKL

6313 MP63 ZKL deep-groove ball bearing is an open single-row bearing with a solid brass or bronze cage (M), P6 accuracy and greater-than-normal C3 radial clearance (P63). It carries radial loads and axial loads in both directions.

HK 1210 B INA drawn-cup needle roller bearing is an open-ended, thin-walled bearing without an inner ring. It provides high radial load capacity in a very small radial space; a suitably hardened and precision-ground shaft forms the inner raceway.

6022 2Z C3 FAG deep-groove ball bearing is a single-row bearing with steel shields on both sides and C3 radial internal clearance. It carries radial loads and moderate axial loads in both directions and is suitable for higher-speed operation.

15x42x17 mm

2302 2RS ZVL self-aligning ball bearing is a double-row bearing with a spherical outer-ring raceway and rubber seals on both sides. It accommodates moderate shaft-to-housing misalignment while carrying radial loads and light axial forces in either direction.

16x52x43.2 mm

FRR 52-1 AS NADELLA guide roller is a stud-type roller for linear guides and cam tracks. Its 52 mm outside diameter provides a durable rolling surface, while the eccentric stud allows precise positional adjustment relative to the track. Retain the complete -1 AS designation when replacing it and compare it with the original part.

NU 2205 URB single-row cylindrical roller bearing is a separable bearing for high radial loads. The NU design has two integral flanges on the outer ring and a flangeless inner ring, allowing axial displacement of the shaft relative to the housing in both directions.

55x90x23 mm

The 32011 FBJ single-row tapered roller bearing is a separable bearing for combined radial and axial loads. Tapered raceways and rollers provide high rigidity and load-carrying capacity.

One bearing supports axial load in one direction; an opposed pair is used for axial location in both directions. The open design requires suitable lubrication.

6x19x6 mm

626 2RSR ZWICKER miniature ball bearing is a single-row radial bearing for a 6 mm shaft with rubber seals on both sides. It carries radial load and lighter axial forces in either direction. The 2RSR design protects the lubricant and rolling contact in small drives and precision mechanisms.

17x40x17 mm

The 3203 2RS neu double-row angular contact ball bearing supports radial loads, axial forces in both directions and tilting moments. Contact rubber seals on both sides help retain grease and protect the raceways from common contaminants.

A compact solution for gearboxes, pumps, hubs, agricultural machinery and other positions requiring increased axial rigidity.

50x110x27 mm

The 6310 C 2HRS C3 FAG deep-groove ball bearing is a Generation C single-row bearing with contact seals on both sides and C3 radial internal clearance. It is grease-filled and normally requires no relubrication under suitable operating conditions.

Suitable for motors, pumps, fans, gearboxes and industrial drives requiring contamination protection and additional internal clearance for temperature or tight fits.

32208 FBJ tapered roller bearing is a separable single-row bearing for high radial loads combined with axial load in one direction. Two bearings in an opposed arrangement are normally used when axial location is required in both directions.