Bearing - 6220 SKF

63/22 2RS KOYO deep-groove ball bearing is a single-row bearing with contact rubber seals on both sides. It carries radial loads and moderate axial loads in both directions, while the factory grease is protected against leakage and common contaminants.

629 2RS KINEX deep-groove ball bearing is a single-row bearing with rubber seals on both sides. It carries radial loads and moderate axial loads in both directions while protecting the factory grease against leakage and common contaminants.

12x22x10 mm

The GE 12 E BBC radial spherical plain bearing is a compact sliding bearing with spherical sliding surfaces. It accommodates tilting, slow oscillating movement and misalignment under radial and combined loads.

This open, unsealed design is suitable for linkages, small hydraulic mechanisms and machine joints with regular lubrication and external contamination protection.

6016 2ZRC3 ZVL deep-groove ball bearing is a thin-section single-row bearing with non-contact metal shields on both sides (2ZR) and greater-than-normal C3 radial clearance. It combines low friction, high-speed capability and protection of the factory lubricant against common dust.

50x110x27 mm

The 6310 C 2HRS C3 FAG deep-groove ball bearing is a Generation C single-row bearing with contact seals on both sides and C3 radial internal clearance. It is grease-filled and normally requires no relubrication under suitable operating conditions.

Suitable for motors, pumps, fans, gearboxes and industrial drives requiring contamination protection and additional internal clearance for temperature or tight fits.

110x170x38 mm

The 32022 X SKF single-row tapered roller bearing is a separable bearing for high radial loads combined with axial load in one direction. The cone assembly can be mounted separately from the outer ring, simplifying installation and maintenance.

This open, unsealed design requires suitable lubrication. Opposed bearing arrangements are normally used when axial loads must be supported in both directions.

35x72x42.9 mm

The UC 207 DKF insert bearing is a sealed ball-bearing insert with a spherical outside surface and an extended inner ring. It is secured to the shaft by two grub screws and is designed for installation in a matching bearing housing.

Suitable for conveyors, fans, agricultural machinery and simple industrial drives. This product is the UC insert only; a complete housing is not included.

The 6210 2Z P6 ZKL deep-groove ball bearing is a single-row radial bearing with non-contact metal shields on both sides. The shields help retain lubricant and restrict common contaminants while maintaining low running friction.

Suitable for electric motors, fans, pumps, gearboxes, conveyors and other rotating equipment. The 2Z suffix denotes two metal shields; the bearing is not watertight. Accuracy class P6 provides tighter dimensional and running tolerances than the normal class.

6213 2RSR ZVL deep-groove ball bearing is a single-row bearing with contact rubber seals on both sides. It carries radial loads and moderate axial loads in both directions, while the factory grease is protected against leakage and common contaminants.

Single-row 32008 AX KINEX tapered roller bearing is a separable single-row bearing for high radial loads combined with axial load in one direction. Two bearings in an opposed arrangement are normally used when axial location is required in both directions.