Bearing - 6301 2RS SKF

12x32x10 mm

6201 FAG single-row deep groove ball bearing in an open design is a versatile choice for radial loads and moderate axial loads in both directions. It offers low friction and smooth running.

60x110x28 mm

22212 ZKL double-row spherical roller bearing with a cylindrical bore carries high radial loads and axial loads in both directions. Its self-aligning design helps accommodate slight misalignment and shaft deflection.

40x90x34 mm

Double-row angular contact ball bearing 3308 D DKF for combined radial and axial loads in both directions. Its rigid, non-separable design provides accurate shaft guidance and can also accommodate tilting moments.

17x47x14 mm

Single-row deep groove ball bearing 6303 Z SRO with a non-contact metal shield on one side. A versatile design for radial loads and light axial loads in both directions, offering low friction and good speed capability.

Self-aligning ball bearing 2306 E 2RS1TN9 SKF has two rows of balls and a common spherical raceway in the outer ring. This design accommodates static and dynamic misalignment between the shaft and housing.

Seals on both sides help protect the bearing interior from contaminants. It is suitable for arrangements where shaft deflection or mounting misalignment can occur.

40x80x19.75 mm

Single-row tapered roller bearing 30208 AP6 ZKL for high radial loads and axial load in one direction. The cone and cup are separable; the complete AP6 suffix is part of the exact specification and must match the machine documentation.

14x22x20 mm

Needle roller bearing without inner ring NK 14/20-XL INA for high radial loads in a compact space. The 14 mm dimension is the under-roller diameter, not a conventional bore; a suitably prepared shaft surface forms the inner raceway.

50x90x20 mm
Rubber seals on both sides

Single-row deep-groove ball bearing 6210 2RSR ZVL for radial load and moderate axial loads in both directions. Contact rubber seals on both sides retain lubricant and protect the rolling elements from dust, contaminants and splashing moisture.

38.1x72.238x20.638 mm

Timken tapered roller bearing set 16150/16284 comprising cone 16150 and cup 16284. Imperial TS design for high radial loads and axial load in one direction; separable components simplify mounting and adjustment.

30x62x16 mm

NUP 206 E ZVL single-row cylindrical roller bearing carries high radial loads and locates the shaft axially in both directions through its flange arrangement. The E suffix denotes an optimized internal design with increased load capacity.

35x72x42.9 mm

UC 207 DPI insert ball bearing with an extended inner ring is secured to the shaft by two grub screws. Its spherical outer surface is designed for installation in a matching bearing housing.

35x80x21 mm

NJ 307 URB single-row cylindrical roller bearing is designed for high radial loads and can also locate the shaft axially in one direction. Its separable construction allows the inner ring to be installed independently of the outer ring and roller assembly.